Just got my Raptor back from Ford Performance After - market parts partner. The Intercooler is installed! It has dual Fans with Blue rubber tubing! The Tech was giving me limited info. It is still not approved by Ford performance, but he felt very confident that it was going to be approved. Once approved this New High-performance intercooler will be an option for 2018 Raptors! He said the cooling numbers vs the stock but I can't remember what they were but he was impressed with the difference. He gave me the dyno testing for the intercooler. It was 66 pounds improvement on Torque and 10 hp. I reset my gas trip setting. I was getting 19-20 mpg going 60 mph! This was a 2-3 mpg improvement from before install. They did Tune testing on it! Let's just say that this little Ecoboost has a ton of hp to be harvested if you don't care about your warranty! They are also designing a CA approved Cold air intake system. Factory Intake tubes have Vortex inside them. They tested and found that there was a 4 hp gain without Vortex inside tubing! Once the new Cold Air intake is designed and approved, they will call me and install it. Telling me that I should get 385 hp at the rear wheel and gain 100 lbs of torque! Will take picture of it all once it is complete! For sure the intercooler does improve MPG with a little hp and Torque to boot!
Hmmmmmm. As much as I want to call bs on this I do have a vendor who spoke with me awhile back about a "super secret squirrel" project that I was told I would be interested in. The numbers do seem a bit high from just swapping an intercooler and an intake though.