anyone have this light bar from F150 led's.com?

[BullGasm]

PALADIN 210W CURVED CREE XTE LED BUMPER BAR from F150leds.com

https://www.f150leds.com/collection.../products/17-18_raptor_paladin_bumper_bar_led

If so, how do you like it? Any regrets?

 

[ddpt]

I wonder how the front camera viewing would work with the light bar mounted below the camera

 

[SilverBolt]

Looks like cheap Chinese crap.

 

[4x4TruckLEDs.com]

Looks like cheap Chinese crap.

That's all it is. Plus they make you drill into your bumper to mount it. Nothing "Raptor" specific about it. We've been selling LED Light bars for years from Rigid/Baja and guys have been mounting them the same way. Sure a 40" OnX6 Bar from Baja WILL cost a LOT more, but i mean, come on... the quality is night and day.

 

[4x4TruckLEDs.com]

PALADIN 210W CURVED CREE XTE LED BUMPER BAR from F150leds.com

https://www.f150leds.com/collection.../products/17-18_raptor_paladin_bumper_bar_led

If so, how do you like it? Any regrets?

If you wanna do it right... grab the Baja Designs OnX6" 40" Bar and mount it to your bumper. Plug and play installation as far as wiring goes, not too hard to drill some holes and mount the bar in the bumper:


40" Bar: http://www.4x4truckleds.com/baja-designs-onx6-40-driving-combo-led-light-bar/

Upfitter Harness: http://www.4x4truckleds.com/baja-designs-ford-upfitter-wire-harness-onx6-s8/

 

[BIGDJE]

I have F150leds dual lower grill lights and love them lots of light output also have rigid 40in curved mount to bumper

 

[Specialtyperformanceparts]

Looks like cheap Chinese crap.

Yes, as other members stated... Cree is typically cheap Chinese crap.

If you don’t want to hack up your raptor and drill holes, we at SPVParts.com design no mod or low mod parts and hardware for your Raptor. That being said, our no drill 40” bracket kit will be released in a couple weeks. It is a no drill, no mod kit that attaches to your Raptor bumper to mount a 40” Radiance or e series light bar.

If you would like to reserve a spot for one of the first to be released or questions, email us at info @ Spvparts.com

Here are a couple prototype pics. Remember, these are rough 3d printed pieces used in development. Not the full product.

Visit our store at- Spvparts.com

And yes, we are a supporting member and our membership drafts every month but for some reason the banner keeps disappearing and the moderator doesn’t know why. He just says cancel and reup. If anyone questions that, I can post a pic of the receipt.

 

[4x4TruckLEDs.com]

I kinda like that John. Let me know when you get them into produce and we'll stock them (like your other awesome products)

 

[baja619]

Bolt-On Front Bumper Brackets. I am thinking about doing something like this or behind the grille.

 

[Specialtyperformanceparts]

Bolt-On Front Bumper Brackets. I am thinking about doing something like this or behind the grille.

Here are the Prototypes. They will be Stainless with Black Powdercoat.
No drill- no modification required.

They will be in stock in 2-3 weeks.

Check out SPVparts.com!

Or inquire or reserve your kit today-
[email protected]