Another Stereo Build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

naamanf

Active Member
Joined
Apr 28, 2017
Posts
66
Reaction score
44
I thought about that too when I posted it...

But I've seen really nice jobs where the alcantara is wrapped around and the handle is done in a separate piece with with stitching on the handle.
Definitely something a good upholstery shop could do. Might look good with contrast stitching. Just something out of the realm for the regular DIY type.
 

Guy

FRF Supporting Member
Supporting Member
Joined
Feb 16, 2017
Posts
1,781
Reaction score
1,124
I agree. There is a custom boat interior place around me that will do that kind of work.

I just think it would look amazing.
 
OP
OP
IronRaptor

IronRaptor

Member
Joined
Aug 21, 2013
Posts
35
Reaction score
25
Location
Anchorage, AK
Sorry to have taken so long to update. The a pillars with the GB's fit great. I didn't have enough time to finish them and when I drove to vegas the heat pulled the fiberglass away from the pillar where the handle meets. Back to the drawing board on those. It does sound amazing though. I tunes the system through my Helix with a laptop and the sound is where ever I want it loud, clear and amazing sound. I had to leave Alaska early so I rushed everything in and it is a work in progress. The amps all fit under the rear seat and with the seat raised I was able to fit the sub with a 7" mounting depth. Will try to post some more pics tonight.
 
OP
OP
IronRaptor

IronRaptor

Member
Joined
Aug 21, 2013
Posts
35
Reaction score
25
Location
Anchorage, AK
Pictures!

So remember I had to slap this together last minute. It is still rough, but everything is secure. I am just posting so it might give some ideas.

The sub box in 33"L x 13.5"D x 11"front and 9.25"rear. Actual Box front and rear are 9" x 7.25" the extra two inches give the sub room to move. The sub is 7" mounting depth and BARELY fit. It is braced inside and gives me about 1.1 cubed inside for a tune of about 42 Hz (I like my rock) Only pushing about 1K watts to the sub though and it is rated to 1500 so I might change amp to sundown and see if I can get more out of it.
 

Attachments

  • 20171018_143245.jpg
    20171018_143245.jpg
    62.4 KB · Views: 95
  • 20171018_143252.jpg
    20171018_143252.jpg
    61.4 KB · Views: 106
  • 20171018_143330.jpg
    20171018_143330.jpg
    124.8 KB · Views: 78
  • 20171018_143334.jpg
    20171018_143334.jpg
    98 KB · Views: 77
  • 20171018_143401.jpg
    20171018_143401.jpg
    48.6 KB · Views: 70
  • 20171018_143804.jpg
    20171018_143804.jpg
    61.8 KB · Views: 72

10SpdsOfFury

FRF Supporting Member
Supporting Member
Joined
Jul 16, 2017
Posts
2,552
Reaction score
10,928
Location
Jacksonville FL
Nice build.

How do you like the AudioFrogs compared to other speakers you have heard? I want to try them but you can’t find much real world reviews. I had JL C5 components in my 2013 but was thinking of Trying the Frogs in my 17.
 
Last edited:

shelteredraptor

FRF Supporting Member
Supporting Member
Joined
Aug 27, 2010
Posts
898
Reaction score
552
Location
on a rock
I like the pillar work, don't know I have the balls to do that. I'm trying to get a pair of spares to mess with, that way I can always revert...
 
OP
OP
IronRaptor

IronRaptor

Member
Joined
Aug 21, 2013
Posts
35
Reaction score
25
Location
Anchorage, AK
Nice build.

How do you like the AudioFrogs compared to other speakers you have heard? I want to try them but you can’t find much real world reviews. I had JL C5 components in my 2013 but was thinking of Trying the Frogs in my 17.

I really like the audio frogs. I was going to go with Audison after auditioning them, but saw these on the wall and the dealer played them for me. They are incredibly detailed especially the GB25s. The 6 3/4 in the doors are alright, but i have heard better. They did handle a ton of power with no distortion, but breaking them in is imperative.

---------- Post added at 10:24 AM ---------- Previous post was at 10:21 AM ----------

I like the pillar work, don't know I have the balls to do that. I'm trying to get a pair of spares to mess with, that way I can always revert...

Thanks. I was really disappointed they came apart like that. I just ordered new pillars at a cost of $110 delivered. So I will re do them. You should try it. They are not that expensive so what do you have to lose?

---------- Post added at 10:33 AM ---------- Previous post was at 10:24 AM ----------

So the bass is underwhelming to me. I like hard heavy bass. I just bought 2 sundown z v.5 10s. Along with a sundown 6000 watt amp. These subs are stupid big. The box is going to be 10" in the rear sloping up to 12" in the front. 12.5" deep and 56" long with the subs facing forward. Ported and tuned to 32 hertz. I will update with more pics later this week.
 

10SpdsOfFury

FRF Supporting Member
Supporting Member
Joined
Jul 16, 2017
Posts
2,552
Reaction score
10,928
Location
Jacksonville FL
I have two Sundown SA10’s on 1200 watts in my Mazda 3 Hatch in a box tuned to 34hz and everyone thinks I have 4 12’s. My Stereo Shop has a customer with a 2017 F250 Crew and two JL 13.5 shallow’s in a custom box, he liked it but I talked him into 4 Sundown X 6.5’s in a custom box aiming forward with the port in the middle. I wasn’t there when they got done with it be they said the customer couldn’t stop smiling. Those little 6.5 have more Xmax then my 12” Rockford P3.
 

n8doggnp

Member
Joined
May 12, 2017
Posts
32
Reaction score
9
Can you show any pictures of how the LMI lift kit looks? Does it make the seat too high for a normal sized individual to not hit their head?
 

Forum statistics

Threads
94,867
Posts
1,992,927
Members
58,259
Latest member
alotajs
Top