Amp Powersteps standard or XL?

[M32]

One of my first mods is to install amp powersteps. I ordered the standard set off of amazon (there's a $100 rebate through the end of the month) and was wondering if I should've gotten the XL. I personslly like that way the XL looks but the tech at AMP research doesn't recommend it unless I have at least a 6" lift. Does anyone have pics of either the standard or XL on their raptors?

Edwin

 

[Zach.RealTruck]

One of my first mods is to install amp powersteps. I ordered the standard set off of amazon (there's a $100 rebate through the end of the month) and was wondering if I should've gotten the XL. I personslly like that way the XL looks but the tech at AMP research doesn't recommend it unless I have at least a 6" lift. Does anyone have pics of either the standard or XL on their raptors?

Edwin

Edwin,

I don't have any pictures of the steps on a Raptor but I can tell you that you made the right decision. The standard Amp steps will drop roughly 12 inches from floorboard to top of the running board. The Xl's will drop 15 inches which is quite a lot for a stock or even leveled vehicle.

Let us know if you have anymore questions regarding these steps!

 

[M32]

Thanks for chiming in Zach

Edwin

 

[mtunender]

What part number did you order?

 

[WhatExit?]

One of my first mods is to install amp powersteps. I ordered the standard set off of amazon (there's a $100 rebate through the end of the month) and was wondering if I should've gotten the XL. I personslly like that way the XL looks but the tech at AMP research doesn't recommend it unless I have at least a 6" lift. Does anyone have pics of either the standard or XL on their raptors?

Edwin

What're you gonna do with your factory steps?

 

[M32]

---------- Post added at 09:36 PM ---------- Previous post was at 09:35 PM ----------

[/COLOR]

What're you gonna do with your factory steps?

I guess try to sell it on CL or just keep it

Edwin

---------- Post added at 09:36 PM ---------- Previous post was at 09:36 PM ----------

What part number did you order?

I ordered 75141-01A. It arrives tomorrow and will be my project for saturday morning

 

[mtunender]

I'm going to try to sell mine as well. What do you think the factory boards are worth?

---------- Post added at 10:24 PM ---------- Previous post was at 10:22 PM ----------

---------- Post added at 09:36 PM ---------- Previous post was at 09:35 PM ----------

[/COLOR]

I guess try to sell it on CL or just keep it

Edwin

---------- Post added at 09:36 PM ---------- Previous post was at 09:36 PM ----------



I ordered 75141-01A. It arrives tomorrow and will be my project for saturday morning

Is the 75141-01a not the plug and play? Im going to order 76141-01a.

 

[M32]

I'm going to try to sell mine as well. What do you think the factory boards are worth?

---------- Post added at 10:24 PM ---------- Previous post was at 10:22 PM ----------



Is the 75141-01a not the plug and play? Im going to order 76141-01a.

I've seen it as low as $150 but most have been around $300-350.

Edwin

---------- Post added at 10:29 PM ---------- Previous post was at 10:24 PM ----------

I'm going to try to sell mine as well. What do you think the factory boards are worth?

---------- Post added at 10:24 PM ---------- Previous post was at 10:22 PM ----------



Is the 75141-01a not the plug and play? Im going to order 76141-01a.

What's the difference? Is 76141 the one you plug into the obd port?

 

[mtunender]

I've seen it as low as $150 but most have been around $300-350.

Edwin

I would be happy with 300.

I really think the power boards make a big difference in the look of a raptor.

---------- Post added at 10:30 PM ---------- Previous post was at 10:29 PM ----------

I've seen it as low as $150 but most have been around $300-350.

Edwin

---------- Post added at 10:29 PM ---------- Previous post was at 10:24 PM ----------



What's the difference? Is 76141 the one you plug into the obd port?

Yeah the 76141 plugs in.

 

[M32]

I would be happy with 300.

I really think the power boards make a big difference in the look of a raptor.

---------- Post added at 10:30 PM ---------- Previous post was at 10:29 PM ----------



Yeah the 76141 plugs in.

Is yours a gen1 SCREW? If so, the 76141 does not fit per Amp's website

Edwin