Ambient Lighting - Pre Order

[TheDoubleAA]

Looks awesome, appreciate the pictures!

---------- Post added at 02:01 PM ---------- Previous post was at 01:49 PM ----------

is there any way you'd be able to take a picture of the wires you tapped into to show the other folks.

Okay figured it out. so, when sitting in the passenger seat look at the shifter with the center console off. There is a blue wire and a black wire towards the REAR of the shifter - this is the one you want to tap, no the forward one. It is the thicker of the the two blue wires.

oh yeah, you might want to shave the left edge of both rubber cup inserts so that you can get them by the LED strip without tearing it off. Here is what mine looks like installed:

 

[Mjolnir]

Per request, here is a picture of the PASSENGER side of the shift box showing the blue and black wires I tapped into. the blue connectors are tied into the blue wire (RED wire coming from LED) and the black wire (BLACK wire coming from LED)

the wires are the ones near the back of the shift box, there is another blue wire you can see pictured near the front, this is not the correct one.

 

[Bilwil]

and also added another stock logo with the RAPTOR logo being available.

I am trying to place my order but the web site does not have an option to select RAPTOR for the logo. How do I specify that I want this rather than the SVT?

Thanks!

Bill

 

[TheDoubleAA]

I am trying to place my order but the web site does not have an option to select RAPTOR for the logo. How do I specify that I want this rather than the SVT?

Thanks!

Bill

my webmaster has been busy with mothers day. When you place your order just click on claw marks and in the note box say you want the "Raptor".

---------- Post added at 02:56 PM ---------- Previous post was at 02:46 PM ----------

I greatly appreciate it!

Per request, here is a picture of the PASSENGER side of the shift box showing the blue and black wires I tapped into. the blue connectors are tied into the blue wire (RED wire coming from LED) and the black wire (BLACK wire coming from LED)

the wires are the ones near the back of the shift box, there is another blue wire you can see pictured near the front, this is not the correct one.

 

[TheDoubleAA]

anyone else get their orders and want to post pictures?

 

[TheDoubleAA]

So I had a bit of an accidental perfect screw up. I was playing with some cut out styles and ended up making the logos look a bit 3d. I'll try and post a video up soon as soon as my phone uploads it. For the folks that have ordered and not received due to shipping on Monday let me know if you want to swap to these. for the folks that already have one and want one of these let me know and I'll give special pricing on this style for previous customers.

---------- Post added at 09:21 PM ---------- Previous post was at 09:04 PM ----------

My new phone doesn't come out until next week and photographer is 200 miles away so forgive the horrible video. This should somewhat show the 3d styling in the new logos on the cup holder lighting

 

[NickPic83]

So how does this look it lit from the side like the cup holder kit comes?

Sent from my DROID RAZR using Tapatalk 2

 

[TheDoubleAA]

So how does this look it lit from the side like the cup holder kit comes?

Sent from my DROID RAZR using Tapatalk 2

I'll try and post up some pictures tonight

 

[TheDoubleAA]

Had a few people say they didn't like the design of the cup holder due to led not being mounted to the plate. I chose the method I did so that cup holder plate could be easily removed and that the rubber cup holders under neath could also be removed with out messing with wiring. The cup holder plate was designed about 10 different times making this the easiest viable option for both install and giving an ambient affect. I did do a different design option for the discs. They will have the led mounted in the glass and be customizable with more surface than the plate was allowing. This is a few of the ones I messed with.

 

[TheDoubleAA]