All New COBB Intakes for Gen 3 Raptor, Tremor, and more!

[COBB Tuning]

Today we are releasing brand new intakes for the Gen3 Raptors as well as updating the lineup for the 2018-2020 Gen2 Raptors and 3.5L F-150 vehicles! We carried over the offerings of both the standard wrinkle black piping with injection molded lid in addition to the absolutely breathtaking full carbon fiber variant. We have no doubt that these new intakes will not only clean up the look of the engine bay, but give you the performance and sound that you crave when pushing that EcoBoost engine!



Despite looking very close to the previous iteration, these new intakes incorporate OEM-grade hydrocarbon traps into the tubing without restricting any airflow. What is a HyrdoCarbon trap you might ask, here's a video showing just that along with some behind the scenes during some of the development of these new Ford truck intakes:

By retaining a level of hydrocarbon trap in the system, we were able to have that intake emissions tested and receive a SEMA Certification showing passing emissions results in preparation for applying for an Executive Order from CARB allowing for 50-State Sale.



If you're ready to upgrade that truck with the latest and greatest, follow the links below to find your respective intake and hear those turbos breathe!



2018-2020 3.5L F150 & Gen2 Raptor Carbon Fiber Redline Intake with HCT
2021-2023 Gen3 Raptor Carbon Fiber Redline Intake with HCT



2018-2020 3.5L F150 & Gen2 Raptor Intake with HCT
2021-2023 Gen3 Raptor Intake with HCT

And if you need any more information, here's a specific highlight video on the new Ford Truck Intakes w/ HCT here:

 

[BoostCreep]

View attachment 424036

Today we are releasing brand new intakes for the Gen3 Raptors as well as updating the lineup for the 2018-2020 Gen2 Raptors and 3.5L F-150 vehicles! We carried over the offerings of both the standard wrinkle black piping with injection molded lid in addition to the absolutely breathtaking full carbon fiber variant. We have no doubt that these new intakes will not only clean up the look of the engine bay, but give you the performance and sound that you crave when pushing that EcoBoost engine!

View attachment 424037

Despite looking very close to the previous iteration, these new intakes incorporate OEM-grade hydrocarbon traps into the tubing without restricting any airflow. What is a HyrdoCarbon trap you might ask, here's a video showing just that along with some behind the scenes during some of the development of these new Ford truck intakes:

By retaining a level of hydrocarbon trap in the system, we were able to have that intake emissions tested and receive a SEMA Certification showing passing emissions results in preparation for applying for an Executive Order from CARB allowing for 50-State Sale.

View attachment 424038

If you're ready to upgrade that truck with the latest and greatest, follow the links below to find your respective intake and hear those turbos breathe!

View attachment 424039

2018-2020 3.5L F150 & Gen2 Raptor Carbon Fiber Redline Intake with HCT
2021-2023 Gen3 Raptor Carbon Fiber Redline Intake with HCT

View attachment 424040

2018-2020 3.5L F150 & Gen2 Raptor Intake with HCT
2021-2023 Gen3 Raptor Intake with HCT

And if you need any more information, here's a specific highlight video on the new Ford Truck Intakes w/ HCT here:

Any updates on tuning for ‘23+ trucks?

 

[COBB Tuning]

Any updates on tuning for ‘23+ trucks?

Nothing yet, but we're continuing to work on it as a high priority.

 

[taco2raptor]

Can this be safely used without a tune. I have a 2023.

 

[BoostCreep]

Can this be safely used without a tune. I have a 2023.

Yes, no problem without a tune.

 

[Gsteve]

what does it do beside look pretty

 

[slimmytimmy]

Sorry for another reply, but do you include the extension cable for the sensor, or does that still need to be purchased separately from AFE? Thanks again!

 

[Nix90]

Sorry for another reply, but do you include the extension cable for the sensor, or does that still need to be purchased separately from AFE? Thanks again!

Was just about to order one of the intakes, looking through the install directions, nothing is stated about an extension cable. Would like to know before I place the order. @COBB Tuning

 

[BoostCreep]

Was just about to order one of the intakes, looking through the install directions, nothing is stated about an extension cable. Would like to know before I place the order. @COBB Tuning

You don’t need an extension with the new one, you only needed it when installing a Gen 2 intake on the Gen 3. The Gen 3 intake Cobb relocated the iat fitting.

 

[COBB Tuning]

No extension harness is needed for the IAT sensor with our Gen3-specific intake. The only reason that folks were using that extension harness was that they were installing a Gen2 intake on a Gen3 truck.