alcoolaid's 2017 Raptor - Weekend Warrior

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

adllewis42

Full Access Member
Joined
Jul 22, 2019
Posts
219
Reaction score
124
Location
Seattle
I’m running them in option 2


Option #2

+20% spring rate over Option #1

+2.25″ lift height over stock (unloaded)

+1.00″ lift height over stock w/ 400lb constant load

Gotcha - And that's with everything on the truck? I've been going back and forth between the Icon's and Deavers but I think I've settled on the Icon. Did you have to do anything else to the rear other than use their bump stop kit?
 
OP
OP
alcoolaid

alcoolaid

Active Member
Joined
Mar 4, 2019
Posts
85
Reaction score
93
Location
Vancouver, BC
Gotcha - And that's with everything on the truck? I've been going back and forth between the Icon's and Deavers but I think I've settled on the Icon. Did you have to do anything else to the rear other than use their bump stop kit?

Fully loaded up I have around 500lb of gear.

Just the rear leafs and bump stop extenders.
 

TiFJ

Full Access Member
Joined
Dec 8, 2010
Posts
387
Reaction score
285
Location
Calgary, AB
Just got back from a long offroad trip. The rack and tent were rock solid. Granted I wasn't in full offroad racing mode and the roads were only moderately rough, but a good initial shakedown run.

Just a heads up to keep an eye on the bolts that hold your tent to the Tepui crossbars and make sure they aren't rattling loose. I've got a Tepui tent and didn't notice anything until 3/4 bolts were completely undone and the last bolt was also very loose. Would be a disaster to have a tent launch itself on the highway or offroad.

Good looking set up though!
 

amREADY

Full Access Member
Joined
Aug 24, 2019
Posts
357
Reaction score
318
Location
Victoria, BC
Just a heads up to keep an eye on the bolts that hold your tent to the Tepui crossbars and make sure they aren't rattling loose. I've got a Tepui tent and didn't notice anything until 3/4 bolts were completely undone and the last bolt was also very loose. Would be a disaster to have a tent launch itself on the highway or offroad.

Good looking set up though!

Thanks. Great tip. I do go over all my nuts and bolts for this exact reason.

x2PwKHBvq3-W1t1gEDxOsY9Ft4iL_YfkjKB7EbODUoYEl2KSuy0QbXzGw9lI7jR9e_H1LA5-_s72XgeGNqXJF60felUX9r6qK317INRZW7iC1k0oZnblFXLke0JnrQYR1bLRbC6kool1UcdrOxw-MaFfAgZA8_zW8_IcMP4GMCguXT_C67GBMiQjuaq8YGXt4d0ljOg_MCbM0qv_Pnhws00IAkBjISX46aBlySesyVwf-9iBMYIrz7qY9TGmlU84CCp_fS0T8UBgXnPK_xBg67MWrKoQZkIY9AzQXmF6OhdO6LnWI5oW5XYcximvvJ3ah5mARzhym0otgaIQwR46Mj7rlm-kvCSaxdRe1eGJJu50UXEUEzagNE5NsCwz18GYV1cCRb7J-LlUUnzB_Ve-WQEh3LF4yx4hLtEULOIXurgI_YQ0-FWq994nvqJnkOWMrIKUM5ul_WGxNMpktZA4C9cNdghp7MnVEFq_RJAkE6mbUSQ-llLO2o8vS6amSSyC5VYH7prHlNFUAP0-JXY3ho44HTeHgMfmVOuSMLfGNnRGIjvCyDBzfWZGyotfsV3zS0vcQMgWDFvRcXYgpIsJX5sxtxo0mhEjHp15w8cVj7gTkpuqWQfZmTPJsbwUIogJbe2CHNS_tiOPxHRKdF_i0PtSnk4Ty2RbzVJDWSPYUeRw6W9mk_Fn-oSsofZe6Q=w1218-h913-no
 

Forum statistics

Threads
95,793
Posts
2,017,258
Members
59,476
Latest member
egermann
Top