Aftermarket Wheels

[nikhsub1]

Meh, not a fan of the shelby raptor at all.

 

[Thomas_JohnDoe]

Lightweight Wheel alert. Kansei a popular drift company is now making off road wheels. Both designs are in stock in bronze and black. The offsets aren't the best. 17x8.5 +00 and -10. But the weight is killer.

KNP (5 spoke)
17x8.5 +00 = 22.5lbs
17x8.5 -10 = 23.9lbs

Roku
17x8.5 +00 = 22.8lbs
17x8.5 -12 = 23.9lbs


View attachment 305202
View attachment 305203
View attachment 305204
View attachment 305205

will roku in -10 clear R1 bbk? if yes PM me a price for 6

 

[Pacific Wheel]

will roku in -10 clear R1 bbk? if yes PM me a price for 6

I can check if R1 can give you the drawings or a template of the brakes

 

[tone228]

I put a set on mine.

View attachment 321305

View attachment 321304

View attachment 321303

Wheels look good, love the fenders. I was looking at the Anderson Composites wide fenders but they don't have provisions for the LEDs and they're a little pricey. How was your experience with them? Looks like you have the OEM size carbon.

 

[Dkinard83]

Hey guys, anyone on here running a -18 offset? I like these Fuel Shock D665 wheels in 17x10 -18. They offer them in a few other sizes as well but I like the look on some images I’ve seen. Just didn’t know if anyone had problems running them. I don’t do a whole lot of off-road, just casually play around at work. Thanks

 

[nikhsub1]

17x10 - 18? LOLOLOLOLOLOLOLOL. BroDozer Maximus.

 

[ReallyNice]

Enkei RPT1 Titanium Gold

 

[Dkinard83]

17x10 - 18? LOLOLOLOLOLOLOLOL. BroDozer Maximus.

Do you even know what it looks like or did you just see -18 and go full retard? These photos are from a regular F150 with the same wheels. I would imaging it looking better under the fenders of the Raptor. That is why I ask. I don’t like what you are imagining as a brodozer. Wouldn’t have gotten a Raptor if that’s what I wanted. I just wanted a wider stance without it losing functionality. I like the wheels but it’s either +1 or -18. I wanted more than +1 so again, that’s why I ask if anyone has ran something close to that

 

[Pacific Wheel]

@Dkinard83 the 17x10 -18 will come appoximatelt 2 7/8" from the stock location. Put a tape to the edge of your wheel and measure outward. That will be the stance. As far as rubbing. You will get some but trimming fender liner will aleviate it for your application (no hard offroading)

 

[Dkinard83]

@Dkinard83 the 17x10 -18 will come appoximatelt 2 7/8" from the stock location. Put a tape to the edge of your wheel and measure outward. That will be the stance. As far as rubbing. You will get some but trimming fender liner will aleviate it for your application (no hard offroading)

Thank you. That’s about what I calculated from the measurements (2 3/4). It may be too much so that’s why I was curious if someone had pics. I’ve seen plenty of raptors with an aggressive offset but wanted to see and hear from someone running them.