Aftermarket Wheels

[Johngm45]

I just ordered my 18 lead foot gray supercrew a week ago and I can’t decide what I’m going to do for wheels. I already have these hostile sprockets in 20x9 with +10 offset on my 16 f150 but i really like the sota off-road wheels with the orange rock ring to go along with my orange accent interior. What’s your opinion?







Sent from my iPhone using Tapatalk

here is ,what a set of 22"s look like on leadfoot., withRPG Perch ..
I prefers a 20” setup so I put the 22’s on my sons truck..



theses are 22X10 XD Chop Stix, t8 offset..







---------- Post added at 01:22 AM ---------- Previous post was at 01:08 AM ----------

a long time in the works, not really, about 5 weeks but I really like how these turned out.
I'm sure I will catch hell about the mall crawl and Starbuck chatter, but I don't give a shit who you are, off road, street racer or married to your cousin, these wheels turned out slicker than *** on a gold tooth...

AG Off-road
20x11 centers are done in brush and polish combo and barrel and lips are in a polished smoke mirror with matching **** hardware ..

I’m going to run a 37" tire and ordering suspension mods at 2" Eibach coils up front and plus 3 deavers with a 1" SDHQ drop spindle in

 

[bigrig]

Innov8 Racing Beadlock Wheels

• 5.0 Backspace
• 0 Offset
• Tire: 35x12.5r17 Toyo MT

I was really impressed how easy these wheels were to mount and balance. I was able to complete one wheel in about 45 minutes. The process included:

• Hand tightening the beadlock bolts by hand then tightening two more times with a torque wrench first at 5 Nm and the second time at 13 Nm.
• Seat the rear tire bead by pumping up tire.
• Inject 8oz Counteract balancing beads.

The wheels came with grade 8 hardware. I special ordered a hub centric center cap which didn't cost me any more than the standard center caps.

 

[gryGhst17]

That’s a sweet looking ride. Let’s take her out!


Sent from my iPhone using Tapatalk

 

[bigrig]

That’s a sweet looking ride. Let’s take her out!


Sent from my iPhone using Tapatalk

Absolutely! I will PM the gang to try to get something set up.

Also, I didn't realize this was a Gen2 thread, sorry for the miss-catgorization, but these wheels would fit on a Gen2 as well so I think it is still applicable.

 

[Panduh]

anyone have photshop skills? I want to see these wheels on my truck if possible ....im having reservations about going with 20's. I would prefer the 17", but I'm just curious.

Wheel - Method NV 605 20x10
Tire - Nitto Ridge Grappler 35x12.50x20

 

[Pacific Wheel]

anyone have photshop skills? I want to see these wheels on my truck if possible ....im having reservations about going with 20's. I would prefer the 17", but I'm just curious.

Wheel - Method NV 605 20x10
Tire - Nitto Ridge Grappler 35x12.50x20

FYI the 605 is the 305 but in wider sizes. The finishes are a little different as well. The 605 is full bronze, the 305 is bronze black lip. If you truly are interested in a set of 20x10's shoot me a PM. These are due in January. They will require a perch collar a little trimming due to the offset.

 

[Panduh]

FYI the 605 is the 305 but in wider sizes. The finishes are a little different as well. The 605 is full bronze, the 305 is bronze black lip. If you truly are interested in a set of 20x10's shoot me a PM. These are due in January. They will require a perch collar a little trimming due to the offset.

I would be interested in these as long as the offset doesn’t make them stuck out a country mile. I’d much rather them fill the inside of the wheel well than stick way out. This is what makes me a little nervous about going with 20x10

 

[bigrig]

FYI the 605 is the 305 but in wider sizes. The finishes are a little different as well. The 605 is full bronze, the 305 is bronze black lip. If you truly are interested in a set of 20x10's shoot me a PM. These are due in January. They will require a perch collar a little trimming due to the offset.

I can't in good conscious mock out 20s but here is what the color might look like with 17s

 

[Pacific Wheel]

I would be interested in these as long as the offset doesn’t make them stuck out a country mile. I’d much rather them fill the inside of the wheel well than stick way out. This is what makes me a little nervous about going with 20x10

They would stick out 3" further than stock. Give or take a little based tire style.

 

[lawdog]

What's the reality of selling stock wheels and tires to upgrade wheels and tires/offset cost of same? I have the standard Raptor aluminum wheels, and would like to upgrade, probably sooner rather than later while tires have full tread. Is there any non-ballchafe way to sell/ship such huge items? Is there any vendor that does a trade/exchange? Just trying to get my mind around the logistics of such an upgrade. TIA.