6.2L Raptor Exhaust/Muffler Video Thread!

[The Macf]

You need that.

 

[Wilson]

The last min was my favoret

 

[Nodak_Raptor]

https://www.youtube.com/watch?v=aIS9KLvL_OA&feature=youtu.be

https://www.youtube.com/watch?v=sBVfH3nQr9E&feature=youtu.be

I have SW headers as well but purchased them with the high flow cats. Is there that much difference between running catless and today's high flow as far as sound goes (tone/volume)? Also, I ordered mine with connections to their mid-side lightning exhuast. If I wanted to run this turndown would I need to find myself a Y-pipe?

 

[The Macf]

I don't know if there's much difference but there is a definite sound variant. You won't need a y pipe but you will need some sort of adapter. The Mbrp is 3.5 diameter.

 

[Nodak_Raptor]

Are you sure I wouldn't need a Y-pipe to have a factory connection? The headers as they are now are "performance connect".

Ford Raptor 6.2L SuperCrew 2011+ Headers

If you make the selections lightning exit vs factory connect you can see the difference.

Also, I am assuming you got the MBRP without the resonator? Did you get T409 stainless or the aluminum? @The Macf

 

[The Macf]

Yes. You will need a double 3" to single 3.5 though.

The Mbrp comes with a ball connection to meet the stock cat back. Once the headers are on, they extend to about 15" in front of the Mbrp canister. So you will need either an adapter or have someone weld in an extension tube.

Nonresonated aluminum.

---------- Post added at 08:03 PM ---------- Previous post was at 08:02 PM ----------

You could also just get 2x 3" mufflers of your choice and put turndowns on those. Checkout the last page of @MOLONxLABE build thread. That's what he did.

 

[o-townFLA]

Self built 3" turndown -to- stock resonator


http://youtu.be/UqjKIlmb8sI

 

[jdubub]

This is a great thread. I tried the black widow 300 series. It sounds so damn good and mean, but it is a little louder than what I need when talking via bluetooth and driving around with clients. So I had to switch to a bigger magnaflow. Now to get 50 posts so I can throw it up for sale so someone else can take advantage of it.

 

[Wilson]

This is a great thread. I tried the black widow 300 series. It sounds so damn good and mean, but it is a little louder than what I need when talking via bluetooth and driving around with clients. So I had to switch to a bigger magnaflow. Now to get 50 posts so I can throw it up for sale so someone else can take advantage of it.

or become a supporting member

http://www.fordraptorforum.com/payments.php

 

[TexasBlues]

Ok found it.....MagnaFlow Exhaust Products - For Trucks, Suv's, American Muscle, Diesel, & Sport Compact Vehicles

My set-up in those vids are just the muffler, I don't have my other mods on yet. On Magnaflow's site, in the universal section, there's a muffler called Magnapack and it's just a round body tube shape. They only show the name on one section of muffler's but all the ones listed below it, that look like it, are Magnapack's as well......I called and confirmed this when I bought mine. I have the 3in/ single 3out, 4" around, 14" body and 22" total length. Magnaflow also told me that the shorter or smaller body you go, the louder it gets. I feel mine is juuuuust right. The glasspack's they offer are similar but not the same, even though they look like the Magnapack. My stock muffler was cut out and the Magnapack welded in it's place.....that way, it's the stock tubing and mounting point towards the front where it connects to the y-pipe.

Also, I found mine for way cheaper online through Summit, think I paid just over $100.

@SOCOMech you sold me on the magnapack, but i have a question... you said you cut out the stock and welded in the new, but in your vids you only have 1 tail pipe... i have twin tips on my 2013 SCREW... will 2 tips make the sound any different?

please excuse my ignorance, i'm new to the raptor world

thanks SOCO!