3rd Gen 37 package fit in a 6’8 Parking garage?

[kadenm]

Hey guys so I’m trying to figure out if I’ll be able to fit in my parking garage at work with the 37’s.

Parking garage states 6’8 at the entrance. I measured, and the lowest point from where I enter to when I park is actually about 80.52 inches.

Luckily I don’t have to go up or down any floors. I enter on the bottom floor and park about 20ft from the entrance.

Really don’t want to have to find street parking as it is very scarce near my office. Anyone know the dimensions with the 37’s or has anyone tried a 6’8 garage yet?

 

[Littlefx4]

Don’t think so per Ford’s Tech spec sheet.

 

[JURASIK18]

Hmm.. You could always air down

 

[mchurch0211]

Hmm.. You could always air down

lol

 

[kadenm]

Lol well damnn. Thanks for that sheet, I couldn’t find the exact dimensions on height with the 37 package.. looks like I’ll be finding street parking

 

[NJ2020]

In my experience that entrance height is usually the lowest point, so could be a random pipe way down in the garage. Maybe have a spotter and try if your spot is close to the entrance.

I have issues with old downtown garages being 6 5 or so, I typically won’t try anything under 6 10.

 

[Duck]

Hey guys so I’m trying to figure out if I’ll be able to fit in my parking garage at work with the 37’s.

Parking garage states 6’8 at the entrance. I measured, and the lowest point from where I enter to when I park is actually about 80.52 inches.

Luckily I don’t have to go up or down any floors. I enter on the bottom floor and park about 20ft from the entrance.

Really don’t want to have to find street parking as it is very scarce near my office. Anyone know the dimensions with the 37’s or has anyone tried a 6’8 garage yet?

no. my 2020 just fits under 6'8". new spec sheet on 37" (on chip hold) shows just over

 

[mchurch0211]

don’t think you are going to be parking in parking decks with a 37 lol truck is taller than spec sheet measured 3 times. she’s a big one

 

[beachz]

Hmm.. You could always air down

I had to change a clutch in a lifted Toyota with 35's and couldn't fit it in the garage. I aired down to about 5 psi and got it through the door.

 

[Ox3721]

I just brought my 37 truck home today. Barely - and I mean barely fit in my garage. It’s a standard 7’ and has maybe 1” of wiggle room