37" tires on Gen 1 w/ ICON stage 4, will they rub off-road?

[robcoleman]

I've read a bunch of the 37" tire threads, and the messages are mixed.

I'm hoping someone will have experience specifically with ICON full stage 4 kits and 37s with the factory non-beedlock wheels, particularly with the increased up travel when having fun with the truck. Has it worked out for anyone, or was pinch-weld modding or fender work needed?

 

[HORN HIGH ACES]

Pretty sure the UCAs won't work with the stock wheels, but ICON should be able to confirm that. Most people run +6 or 0 offset which will rub big time. I have +2 front fenders and still get slight rubbing at full compression with 37's & 0 offset.

 

[kocher93]

315s on Icon wheels 6mm offset. You gotta find that mystical extra inch somewhere in the wheel well.

 

[robcoleman]

Thanks, that's a big help!

 

[Gorzz]

I just ordered the Icon stage 4 for my Gen 1 screw. Will I be good with the stock (SVT) wheels/35"tires while utilizing the full travel of the system with a level set up without having to worry about rub?

 

[CleverGirl_]

I just ordered the Icon stage 4 for my Gen 1 screw. Will I be good with the stock (SVT) wheels/35"tires while utilizing the full travel of the system with a level set up without having to worry about rub?

No

 

[Gorzz]

What will I need to do?

 

[MurderedOutSVT]

Never be afraid of getting a good rub

 

[Gorzz]

Lol... I just don't want to be picking up inner fender wells and the damage that goes along with it.
If I break something , it will be because I was using it, not because I didn't have it set up properly.

 

[TomDirt]