2014 SCREW Shifting Assembly

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

cordeau70

Member
Joined
Nov 16, 2018
Posts
5
Reaction score
0
Location
California
2014 screw shift assembly seems to be sticky or tight. When I start the truck (either cold or warm) and shift from Park to Drive it is sometimes hard to get it to drive almost like it tightens up as the knob gets close to drive. I have to shift back up to park and then back down to drive a couple times before it feels free or normal again. I hope this makes sense. Any help or insight would be greatly appreciated. I will work on a video of some sort.
 

badm0t0rfinger

Rocket Man
Supporting Member
Joined
Nov 30, 2014
Posts
1,691
Reaction score
3,756
Location
The Beach
You can always take apart the center console and see if something is binding against it. It takes about 20 minutes to do so. The shifter could be shot, it could be binding on something, it could just need a cleaning after something nasty made its way down there.

I believe this is the video I used:

The only difference for the Raptor will be popping out your aux switches.
 
Top