2014 gen 1 performance mods

[Dylanis2]

Just out of curiosity, has anyone ran Dyno charts on a 6.2 with basically all the simple upgrades you can do without the actual supercharger? Truck currently has stainless works long tube headers, afe cold air intake, magnaflow exhaust, and a 87 performance tune from 5 star. The truck already had the headers and cai when I got it but just the magnaflow and tune has beefed it up exponentially. I figure all together I should be around 50+ horsepower over stock with said mods. Tia!

 

[MTF]

Just out of curiosity, has anyone ran Dyno charts on a 6.2 with basically all the simple upgrades you can do without the actual supercharger? Truck currently has stainless works long tube headers, afe cold air intake, magnaflow exhaust, and a 87 performance tune from 5 star. The truck already had the headers and cai when I got it but just the magnaflow and tune has beefed it up exponentially. I figure all together I should be around 50+ horsepower over stock with said mods. Tia!

This section is for the 5.4L !!!!
You need to scroll down one more for the 6.2L section.

But, 50 (RWHP) over stock is the very very high end with 93 octane.
The torque won't be as much though.
I believe only one Raptor achieved that but was using E30 or E85

200+ HP (RWHP) with the stage II Whipple.
And 180 to 220+ ft.-lbs. (to the wheel) of torque increase.

Reference: 411 HP (FWHP) at the crank, stock
_________ 317 HP (RWHP) at the wheel, stock

 

[mprice1234]

To really get any bang for your buck you have to go with supercharger, then you chance having more bang than you were hoping for.