2013 Tux Black SCAB build in VA

[ray101381]

i like the zinc plated bolts, so i will be keeping them, the only other thing i'd consider is possibly anodizing them

 

[ray101381]

Just got back from dropping the truck off with Don at Krazy House Customs. A bit anxious hope everything goes well. They'll be doing the following:

-RPG Fox 3.0's front and rear
-RPG Tie Rods
-RPG Stage 3
-RPG Pre Runner 1.5" UCA's
-SPC Cam Bolts
-Alpha 1 Spindle Gussets
-Ford Racing Blue Cam Covers
-ICON LCA Skids

 

[svtfan]

That truck is gonna be sick once it's done at Krazys!

Nice mod list!

Brian

 

[ray101381]

a few pics of the progress at KHC

 

[SQAudiophile]

Nice progress Ray!

 

[NickPic83]

damn im jealous. thats gonna be sick

 

[naptown]

Ray, your truck is looking so sweet. I have almost all your mods on my list. One question that I am unsure of, the advantage of the spindle gussets? I know if you upgrade all the suspension u should look at all the components as well, since the truck is already torn apart. I have off roaded for years in my Jeeps and Chevy's , but the Raptor is a whole different animal. Thanks again for any advice.
Marty

 

[ray101381]

Ray, your truck is looking so sweet. I have almost all your mods on my list. One question that I am unsure of, the advantage of the spindle gussets? I know if you upgrade all the suspension u should look at all the components as well, since the truck is already torn apart. I have off roaded for years in my Jeeps and Chevy's , but the Raptor is a whole different animal. Thanks again for any advice.
Marty

if you look at the design of the stock spindles you'll see a 90 degree bend where the pin from the uca goes into the spindle, from what i understand under heavy abuse the spindles will bend and the alignment will be out of whack and almost impossible to get back into specs, these just reinforce the spindle to prevent that from happening. it's really not that expensive, probably didn't need it but it's good piece of mind.

 

[ray101381]

So i've haven't updated this post in a while, i was gonna take pictures after i got her back from krazy house but everything done was underneath the truck so not much to see. all i can say is after the rpg stage 3, tie rods, control arms, spindle gussets, and rpg fox 3.0's, it's a completely different truck. KHC did a fantastic job, steering is so precise, mid corner bumps don't throw the truck off. it's amazing.












i've also been busy with a new toy it's a 2013 Ducati Monster 796 so it's been taking up all my play money and time for now.
on the way:
-Full termignoni pipes, ducati performance ecu and ducati performance air filter
-CNC racing front sprocket cover, black rear sprocket carrier and gold flange nuts, cam covers, axle nuts, rear brake reservoir cover(all pieces will be gold anodized)
-carbon fiber manifold shield, carbon fiber muffler guards, carbon fiber exhaust valve cover
-Driven d3 grips
-g2 throttle tamer
-smoked windshield
-gold windscreen bolts
-speedymoto frame sliders, front and rear axle sliders

Installed:
-RP Moto Ti main frame bolts
-Ducati performance viper mirrors
-ducati performance oil cap
-ducati performance bar ends
-ducati performance timing inspection cover
-CRG RC2 levers
-slingshot racing mirror risers and reservoir caps
-evotech tail tidy

 

[ray101381]

new toy....again. raptor is now officially the beater. 2013 GTR super silver premium