+0 offset rubbing

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MNLeadfoot

Active Member
Joined
Oct 28, 2018
Posts
54
Reaction score
41
Location
MN
Wondering if there are any rubbing issues at full compression or full lock on the gen 3's with stock tire size and 0 offset?
 

Slaptor911

Member
Joined
Feb 10, 2023
Posts
25
Reaction score
48
Location
San Diego
I have a very slight rub with Method 17" 0 offset. 1" Eibach Springs. Full lock only on drivers side, and it barely touches the lower, rear, inner part of the body.
I do have 37x12.5x 17" Toyo RT Trail tires, which are one of the larger 37's out there.
 
OP
OP
MNLeadfoot

MNLeadfoot

Active Member
Joined
Oct 28, 2018
Posts
54
Reaction score
41
Location
MN
Stock as in stock 35". I'm more concerned with rubbing under full compression especially since I am stock ride height in the front for now.
 

raptor730

Full Access Member
Joined
Dec 2, 2022
Posts
146
Reaction score
155
Location
Florida
Stock as in stock 35". I'm more concerned with rubbing under full compression especially since I am stock ride height in the front for now.
Im running +1 offset on a 9inch wheel, 325/60/20 which is 1 inch taller than stock and definitely wider. I get light rubbing on inner wheel well. Its mostly on the bolt holding in the liner. Easy fix. I dont think you will rub at all
 

catinthehat85

Full Access Member
Joined
Jan 8, 2019
Posts
342
Reaction score
339
Location
Socal
It has been demonstrated in a video (don’t have the link) that 0 offset will tear up your rear fenders when under full articulation on one side. 35s and 37s wouldn’t make a difference.
 
OP
OP
MNLeadfoot

MNLeadfoot

Active Member
Joined
Oct 28, 2018
Posts
54
Reaction score
41
Location
MN
It has been demonstrated in a video (don’t have the link) that 0 offset will tear up your rear fenders when under full articulation on one side. 35s and 37s wouldn’t make a difference.
This is exactly what I was looking for and also hoping wasn't the case!
 

Yeti360

Member
Joined
Oct 31, 2021
Posts
33
Reaction score
59
Location
California
I just made the switch to Method 701's 17 x 8.5 w 0 offset- I left the stock 35 tires no rubbing so far and while I haven't sent it yet I did put 1500lbs in the bed with no rubbing.
 

Attachments

  • IMG_0928.jpg
    IMG_0928.jpg
    358.4 KB · Views: 198
  • IMG_0944.jpg
    IMG_0944.jpg
    200.7 KB · Views: 191

catinthehat85

Full Access Member
Joined
Jan 8, 2019
Posts
342
Reaction score
339
Location
Socal
This is exactly what I was looking for and also hoping wasn't the case!
Glad I could help, it's surprising how little these kinds of things are discussed. You have a million page thread on how 37s on a stock 35 truck don't rub and it's simply not true unless you're just driving and doing things in your truck that any other truck could do. I'm considering doing some kind of fender mod myself to get the 1 inch of travel back in my 37pp.
 
Top