Search results

I cut them out of big fender covers we use on the trucks at work, I do have the tracings, and I also have 1 set left out of the 4 sets I made. Let me know if you are interested.

That sucks, plus finding resonator for cheap is impossable, people want big money or junked there exhaust already.

This is magnaflow, give them a call to make sure it's the correct sizing, our exhaust is 3" to the muffler, and dual 2 1/2 exit. but ford may use a different ball size then them.I think you will have better luck with spintech, first part top of page. MagnaFlow Performance Exhaust...

Here's a couple pictures after I installed, I set them 12" from the ground, I can cut them If I need to, and no more of that crap you see on the exhaust.

I run mud flaps, keeps a lot of crap off the side of the truck, I made mine, didn't want to drop 100 bucks on them if I didn't like them, do a search lots of write ups on them.

So if we remove the laser etching and annodiezing, we could get the price to 400.00 a set. ok 450.00, thats sounds about fair.

Screw that, were freaking about road salt killing our shocks, Now we have salt water killing the suspension, brake system, rims, and who knows what else, like stated above, I take my bad ass truck, and tow a bad ass boat, hands down.

Welcome NJ, from NJ ( BAYONNE/ JERSEY CITY AREA)

Do it in stages, yes bumpers aren't cheap, and add lights and the holy shit factor hits you, but god for bid, you hit a deer, price the damaged truck parts, and the holy shit im an ass factor sets in, should of got bumpers. Take your time , think and buy. Good luck with your new toy.

Its your truck, and when it comes to that every one has a vision of what they what there truck to look like, on thing you have going for you is ,yours is black, so it won't stand out like light colored trucks

Pretty much all of us who do the line-x do the wheel wells, now when you say under side, are talking removing the bed and sprying? that is going to drive your price up, but it would be bullet proof, Rockers are up to you, your truck, and your thoughts on how you want it to look, there's a hand...

Welcome to the addiction, best of luck.

Definitely go line-x, I would look into a pre runner bumper, something that stands off the truck something, like a ADD STEALTH,or something a little more HD like the IRONBULL, god forbid a deer runs out on you want the bumper to do the job, not the HOOD, GRILL AND FENDERS, that are...

Just buy a tube of grey silicone, 3qts of 75w-140, and drop the diff oil ,do a clean install, can't go wrong that way, or buy a qt from the dealer, and try to remove bolts while making sure the cover don't fall off or leak to bad- ( WORKING ON THE FLY ) no guaranty that way 50/50.

If it's leaking with some bolts removed, then just buy some rear diff oil, and change it out, better piece of mind knowing it was inspected, and cleaned, for new install. Simple to do, If you can change your oil, you can handle this, don't need to take to anyone.

I used this place below, there is another place in bridgewater nj. The guy below is a small shop, would never think he was a line-x dealer, but did a great job, total time 4hrs, cost me 529.65 with tax. LINE-X of Central Jersey South Amboy, NJ 08879 (732)525-1363/[email protected]...

When mine was done, he pulled all the bed bolts, tie down hooks, removed the tail gate and the bolts and panel that cover the tailgate lock assem, then masked and plastic wrapped the truck for spraying. awesome job. He told me this is how all trucks are done, the only way it wouldn't be done...

Looks like you will have a tough time with after market bumpers.

Looks like the inside corners of the bumper pads have scuffs, thats way i said that, also why would you want to park close to any wall besides fitting in your garage, just asking, nothing more.

Glue the insolation strips to the wall, not to ugly up the truck, also the bumper pads LEFT AND RIGHT of your light bar stick out further than your location of the insolation, Just my 2-cents.

You also have the method 105 beadlock wheels, same color setup as the NV"s Machined Truck Beadlock Off-road Jeep Wheel | Method Race Wheels http://www.methodracewheels.com/collections/race-wheels/products/105-beadlock-matte-black

And I typed that with one finger, the other was blocking your plate.

Nice job, now make it go back up on its own.

Make sure you install cool stuff before you return it, loud and clean sound to add.

Why, comming to jersey noah?