Add caster to help clear tires and turn down thick tie roads .25" on the lathe. How much caster you have? You could also change those internal alignment centering plates to push lca forward...have heim joints up top?
KMC XD228 Full Beadlocks
Special thanks to Scott over at customwheels4u for hooking me up with these wheels! Boring centers out to fit flush caps...which had to be custom since center flange is thicker on these wheels. Prismatic Black Jack and Ink Black beadlock rings powder.
Are you running a tune? I ran 5 star tune for prob 50 miles and no problem, I have the mpt tune now and maybe 700 miles no problem. Did you put on the extenders like I did? Post converter? The only difference would be I have the afe cats which I'd suspect they both flow pretty close to each...
MacG - I posted earlier that I have the AFE catted downpipes and running the MPT 91 PR-X tune which is the performance one and trans tune. No problems, perfect. I'm running 37" cooper sst pro mud terrains and it roasts those things easy. Very good smooth shifts in normal, sport and baja. Get...
I used these:
Universal O2 Sensor Spacer Adapter Isolator (Pack of 2) https://www.amazon.com/dp/B00OXWZ0VU/?tag=fordraptorforum-20
Which are straight extenders - depending where your sensor location is on the brand of downpipes you may need a 90 degree one. I have AFE.
I for sure like the tune more than 5star, I have the afe catted downpipes and turbo adapters, CAI, full race intercooler and 170 degree thermo....runs awesome! No cel, just power and smooth shifts! I put o2 sensor extenders post cats to help prevent cel. Great job!
Nice Scott!
Still waiting for those KMC/XD228 Machete to come back from powder (was out of town on vaca)- I did the same thing! Matte with gloss ring - Prismatic Black Jack with Prismatic Ink Black ring. Chief made the flush caps but the wheels where thicker so he machined a new set taller...
I did not order the flare I just had to order the clips and miscellaneous parts. When I pulled the The flares and trim to paint it black to match my truck.
I saw the flares painted in the description. I looked up my fender clips and such when I painted them on Official Ford Parts Site | Buy Motorcraft & OEM Ford Parts Online | FordParts.com just put in vin and look up under body/fender. Took part number to ford and asked about the high $ and they...
I had the same thing happen twice. Once before tune and one after. I will search for the thread, sorry traveling right now. But after following suggestions from members here - battery disconnect / KAM reset I have been perfect! I've tried to make it happen both times I was getting on it around...
Looks great! Basically same thing I have sitting in my shop ready to bolt on. Have the svc collars and eibach coils and + 3 rears.
Who makes those sliders/steps?
I have to say ADD was awesome to work with, Cole over there was super helpful. I first ordered the Stealth R and after looking at it more decided to go with the Race series r and then needed the intercooler which I wanted anyways, I think it will help a lot with the hot weather here and tuning...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.