Search results

Live up in PNW, had about 3 ft of snow to deal with the last week. Its been fun but haven't been able to follow up on the issue. Its pretty much gone now off of main roads, but my neighborhood gets no plow so is still about 6" deep snow/slush mix. Will likely be checking it out over the weekend.

My truck has creaked and clonked from the rear since day1. Never found the cause. I have even since changed the springs to deavers and the shocks to Fox 3.0 but still get it. I thought it might be the bed itself but I can grab the rear fenders and shake them around but nothing. I just turn...

Thanks Kyle, will do.

So I didn't get a chance to look at it yesterday, but I just tried the following and captured the details (I even took pictures of the dash at each stage. 1. Re-flashed to the Stage0 v100 Map. Result: same thing, Truck states Auto StartStop Not Available and no AutoStartStop symbol shows up...

Its a 2018 SCREW, are there differences in the way it works based on year and model?

Thanks Nick, Tried all of the possible configs of A/C, Heater etc. off, but no luck. Does it driving in normal mode 2H, only thing that I am aware of drawing power is the dash cam, but I cant see that having any effect (it didnt before the tune went on). I will be trying to re-flash to other...

Kyle @COBB Tuning anything you can share in way of identifying why I cant enable the AutoStopstart feature with the 91 OTS tune applied? Other than just removing the tune I am not sure what else to look for. Thanks for any advise,

They were from "Rappy Graphics" before they ran into issues with Ford Licencing. (I think they are working things out and maybe will be available again soon?) I have also seen that there are other suppliers making similar.

Thanks for confirming, i guess its either the 91 tune or I have some other issue. I think i will try and go back to stock and see if it works again. Like you I don't actually mind it either, i was more concerned with what was stopping it if not the tune. I am in PNW, weather is pretty mild...

Maybe i wasn't clear, so will ask another way. Does anyone with a COBB tune installed still have auto stop/start still working? I know how to set it up using the AP and have set it up to be ON. but the truck states auto start/stop is Not available. Thanks

I loaded the 91 OTS tune a week ago and truck definitely feels much more responsive and has better power delivery. One thing I noticed though was that the Auto stop start stopped operating (I know most will see this as a positive!) . I assumed that the 91 Tune had it disabled by default so...

I think you have to do the same thing with any front mount IC. You have to remove the shutters (As they are where the intercooler sits) and some slight trimming of the material that held the shutters in place. Not a lot, but you definitely need to trim.

Ahh, makes sense. I didn't notice that there were any issues when putting the skid plate back, but when I sort out the bumper struts I will take a closer look. thx.

Thanks, yes i was going to try similar, I think i should be able to do that with the SVC mount to. one thing i was not sure of was the 4 spacers highlighted in the pic. I think they may have been sent in error? let me know if you want them back.or if i should have used them somewhere.. :-)

I work slow and did it all on my own, whole thing took me most of Saturday from 9AM to 6PM. That included a lot of looking things over for a long time before doing anything and looking online/at instructions etc. If I was to do it again it would probably take me half the time.

Thought I would do a writeup on my weekends activities, I installed a Warn Zeon 12 S Platinum winch using the original front bumper. This requires that the standard intercooler be replaced as the winch sits where the original intercooler was. All parts I used: SwarfWorks winch mount...

Today I will mostly be fitting SVC intercooler Swarfworks Winch mount, Warn Winch and a couple of BD lights

Yeah, I think if you go to the ford parts site there are probably a dozen or more options for Tonneau covers. I was referring to the ones you can pre order on the main ford website configurator when ordering a new truck. I think when you order from the dealer you can specify what you want. I...

If you are referring to the standard Hard Tri-fold Tonneau. Its just a regular aftermarket cover and the dealer just sticks a small ford blue oval badge on the back edge as an afterthought. I just peeled it off as it wasn't even stuck on straight.

- Pre-Collision Assist w/ Automatic Emergency Braking (AEB) included for 2019 Also noticed that: Sirius sub is now 5 years: - B&O PLAY™ Premium Audio System HD Radio™ and SiriusXM® Radio1 (includes 10 speaker and subwoofer) Note: When ordered w/Voice-Activated Navigation System (50N) SiriusXM...

https://www.cjponyparts.com/american-car-craft-tailgate-badge-set-f-150-raptor-brushed-stainless-steel-with-factory-tailgate-applique-f-150-raptor-2017-2018/p/772065/?bvdata=action%3Drr_submit_review%26containerId%3DBVContainer%26productId%3D772065 : Stainless badges. Not the cheapest option...

I had Rappy Graphics decals on the rear F150 and Raptor badges but after a few washes I noticed that the edges were lifting up in places. I think it could have been as a result of me not getting them lined up perfectly but I decided to remove them as they were looking a little tattered up...

I specifically asked a couple of the instructors at Raptor assault what was different on the Raptors they used over stock. The said the Light bar at the front, the Bed cage with Dust lights, wheel lug nuts and the CB Radio other than that everything is stock. So if you liked the sound of the...

I Tried the single large tray that covers the entire width but found I wanted to get underneath it fairly often and its a real pain to get out once loaded with stuff. I ended up using two slimmer trays side by side that pretty much fill the gap. I went with this one from Amazon...

Perfect, thanks Bart!