Search results

A U-Haul trailer isn't going to be setup for a WD hitch. You can't just slap a WD hitch on, it is installed on your trailer as well and configured appropriately. ETA after: What Range Rover weighs that much? A full size RR long wheel base will have a curb weight of about 5K lbs based on specs

Sounds like the rear end got loose and TC did what it is supposed to do.

FYI, you can put a coating on top of PPF.

I'm in NoCo and would be happy to help out if you can't find someone closer.

$4-500 depending on your area.

I'm going to pull the trigger on a set of Morel Maximo components. I've gone wide open SQ installs in the past. This time I want to keep it simple. 2019 B&O, I see conflicting information in this thread on utilizing the cross-overs for 2019. Based on the wiring diagram for B&O the tweeters come...

One thing I discovered last night. Was adjusting my tire pressure down a couple pounds and noticed the TPMS sensors are reading lower than 3 different gauges I checked. Every gauge I had in my shop was reading about 1 - 1.5 PSI higher than what the truck said. So check everything again even if...

Absolutely, completely agree with that. I typically air down to 26 PSI on the Raptor when off-road. That's why I'm thinking dropping to 34 on the road may make a difference.

I've experienced similar in my 2019. The suspension is much stiffer and more unsettled compared to my 2017. I'm running 36PSI on all four corners and planning to air down further than I had on my 2017. The new shocks certainly handle both highways and off-road differently. The highway...

How fast/hard did you hit the deer? I'm surprised there was that much damage to the bumper.

Well written @smurfslayer

Sent you a DM

@Jepper Reading through the thread it seems like you are willing to ship both now? If so, let me know. I have a dock so they could be shipped freight.

Several have asked about changing the color of the Raptor... I found these directions associated with the PX3, I'm assuming the same could be done on the PX6 with a resolution change. Now we need to find out how to change the wallpaper and remove the Ferris Wheel HOW TO CHANGE THE CAR PICTURE...

Mine was misaligned. Took me less than ten minutes to adjust. Not hard at all.

There is one here in North Colorado also sitting at a dealer. I think that "topper" was several thousand dollars. Completely terrible

Sounds like the new cable is the biggest win... Are they including it on all new tablets? I saw on the other thread that they aren't available. I'm going to jump on this when I can order the latest with the longer cable.

Can confirm... My cousin is sleeping with a girl who has a brother that is the UPS delivery guy to the company that provides coffee supplies to Ford R&D ETA: Wait... Not sure if she's sleeping with my cousin or all of Ford R&D, either way it's a credible source. I promise!

I found them a bit stiff in the beginning. 3K miles later they have begun to break in a little. I doubt they will go much further... They feel like a typical Recaro to me and I like the bolstering and stiffness though.

This exactly... They aren't backwards. Stretch it and flip it over the rod. Any upholstery shop could help you in their parking lot. I'd rather hand them a twenty than have the dealership attempt to pull it with channel locks or some other stupid approach.

Was looking for fire extinguishers... Didn't see a single one. WTF?!?

@Supergumby5000 If you are interested in Gorilla there are two options (these part numbers are for black) Gorilla 26144BC are the proper size (14x1.5) and have a smaller diameter that fit nearly all aftermarket wheels we have, however they are 2" long and this length isn't necessary for most...

@FordRaptorLights.com damn-it man! You got me... I'm going to have to go back to bronze. They just look to good on blue. Center overlays in Black or Blue?? Placing order today

:beatdeadhorse5::beatdeadhorse5::beatdeadhorse5:

Just my personal opinion, but I'm not going to load my truck up with a bunch of manufacturer decals unless it is some sort of discount or sponsor type application... I can't see spending money to make decals for something I've already paid for.