Search results

Loss of boost, rattling, stuck open. Sounds like what you have. If it is the waste gate the dealer can file a warranty claim and get the turbo replaced.

Everybody's favorite raptor instagrammer my2017raptor has them. He posts at least 6 pictures of his truck per day so there's plenty for you to look at.

Yes but that wouldn't be the ideal solution. Wheel hop and axle wrap will be increased and they are already quite bad with the stock blocks.

If you're not going to read the manual, at least try searching the site first.

A few people have had waste gate issues

You know manual reading is strictly frowned upon 'round these parts. What were you thinking?

Something in my power steering is broken somewhere. I have to take it in so they can figure out what's wrong and fix it. I put on a lot of off road miles and took it in to get an alignment and after they got it aligned and driving straight, the steering wheel was pointing right. However, I did...

Coming from a third gen Cummins it was a very handy feature Sent from my 2017 Raptor using Tapatalk

Has anyone figured out how to make a 2017 raptor roll coal? Does it require a tune? Sent from my 2017 Raptor using Tapatalk

You beat me Sent from my 2017 Raptor using Tapatalk

The transmission is rated for 800 lb-ft Sent from my 2017 Raptor using Tapatalk

Some bushwhackers would be totally sick

Bro take your pedal commander out of eco mode Sent from my 2017 Raptor using Tapatalk

Then you better not do raptor stuff with it if you’re trying to keep it above 8 Sent from my 2017 Raptor using Tapatalk

Need. Where's the best place to get a set of bull horns in the central coast area?

Good news! It can be had for only a mere $89,699. That's $7,600 of pure SAVINGS. Tonka - tuscany https://www.fordofmurfreesboro.com/new-Murfreesboro-2016-Ford-F+150-Lariat+Tonka+Edition+Shelby+Supercharged-1FTEW1EF2GKE66373

Quit lying to yourselves. All raptors are gay. The Tuscany tonka f150 is the supreme best of the best of the best truck. All you slow ass losers are just too poor to afford it.

After BJ's $12k headliner there's only 8k left

Also picked up a set of built right bedside mounting things and installed them. Nice quality, easy to install, sturdy, and seems like it will be handy.

It's possible. They stick out about 1.3" more than stock. This picture kind of shows how much contact it was making so imagine this plus tire bulge due to low air pressure and the truck leaning to the driver side through the turn. Looking at this picture, with stock offset wheels it probably...

Okie dokie so apparently not wanting to need power for your cooler is silly. A lot of people are silly. It's not like fridges are a secret that cooler owners don't know about. At worst ice is still good for 4 days even in the desert. If you don't want stuff to get wet, you can actually put it in...

Coolers come in bigger/more sizes, you don't need power, they are cheaper than ARB fridges, and nice coolers hold ice better than cheap coolers. Plus ice is really cheap. If your food is getting wet you're probably doing something wrong. But you don't have to buy one if you don't want one...

Another update with some things I thought of. Not getting any coil bind with my eibachs. Some people were complaining about coil bind but I went and checked and didn't see any marks. I love my bison cooler. The latches are very nice and the dual drains are handy. It still had ice when I emptied...

It is in the front of the well. I’ve already dovetailed the rear. In the front I was getting contact in that spot (pic below). I first tore off the flare running through the whoop section I described earlier and the metal had not yet been torn. After I had removed the flare by removing the two...

I've heard some complaints about the eibach springs but I have to say they were balanced in the whoops and didn't bounce around when the front came down from charging up a dune or landing after leaving the ground.