I've made a couple small changes thanks to all the information in this thread.
I also enabled Glare Free Lighting, but since it stays light so late I haven't been able to use it much but can confirm it is working for me. One other change I've made that I haven't seen mentioned here yet, even...
It does when you see the numbers of the Lightning they are claiming they will produce. IMO they are pushing those out the door as fast as they can, to the detriment of other vehicles such as the Raptor.
Not in the current market. Your comparison is not apples to apples. You aren't figuring the ADM on the R, and don't forget 109k is the base price as well. Then add in the fact the numbers will likely be more limited than the Ecoboost Raptors, and I don't see it affecting current prices much. The...
Vinyl and paint are two totally different things. You wax your paint, but wax isn't really tailored specifically for vinyl's needs. The enemy of vinyl is the sun, specifically UV rays. So I use a vinyl protectant for the decals. What I'm currently using is Adam's VRT. I apply it, and then wipe...
Congratulations on finally seeing the light at the end of the tunnel!
Mine was originally ordered last July as a 21, reordered in October as a 22 since it wasn't going to be built even though the dealership had a valid allocation. The 22 was supposedly given a priority since I had originally...
Plumbing the hose is an option for inside the cab use. I'm not crazy about running a line inside the cab to the outside, but everyone has a different threshold of what they're comfortable with.
Have you seen where some of the Jeep guys install theirs? I'm not worried about moisture damage to...
Not anything that can be checked easily, but something that is more to be aware of...
I was having problems with my tailgate not working. It was an intermittent issue. Sometimes it would work, sometimes it wouldn't open or close no matter whether I used the key, tailgate button, or dash button...
Dust/sand, not crazy about the rain or snow either. Yeah it's just water, but I think back to some of the monsoons I've seen, and I wouldn't want to leave the doors open in those either. Of course depending upon the passenger, just the cold or heat rushing in can sometimes cause severe noises...
The mounting plate came with the compressor. Under the rear seat wasn't an option I wanted to consider for a few reasons. First I didn't want to lose any interior storage space. Then there was the noise factor, and the fact that you may want to keep the heat, cold air, rain, or snow, outside the...
I continued the three other wires towards the front bringing them out of the frame rail at the fenderwell. I used wiring loom to protect the wires, and routed them up and into the engine compartment. See Figure 7. Once in the engine compartment, I tied the extended purple wire into the wire for...
The wiring diagram that comes with the unit can seem a little daunting at first, but it isn't that bad if you're just wiring this up to inflate tires, like I planned on doing. Additional wiring is available for air lockers and additional switches, and wouldn't be used in my scenario.
Focus on...
I just installed an ARB Twin Air Compressor into the bed of my 2022 Raptor. As this will be used to reinflate tires, I'm using just the twin compressor unit and didn't opt for the optional external tank. This is the walkthrough of my installation. Since I can only add 5 photos to a post, I'll be...
ARB install hasn't been too bad. Looks worse than it really is. I started it today, just didn't get time to finish. Should be able to complete the wiring tomorrow.
I'd be skeptical of the fact you had an allocation given those dates, despite what you've been told. I would think you should at least have a build date by now regardless of supply constraints.
There was no price protection when my 2021 was changed to a 2022. In fact, there is no "roll over"...
These sort of threads always blow up into opinionated pissing matches. I ordered last summer, waited 10 months, and paid MSRP. While the wait was long, I was fine with that. I had several opportunities to buy a different truck, pay ADM, and have it sitting in my driveway sooner. I didn't though...
I've heard that some fuse taps fit better than others. Maybe that's what you experienced.
I didn't experience any issues with what I used, which is why I wanted to cover the basics of how I installed mine. Hopefully it'll save someone else some time and headache.
2021+ Ford Raptor OEM Fog Light Upgrade Kit with Brackets & Rigid SR-M Direct Replacement Lights
Easy to install, a direct swap and a factory appearance. Just what I was looking for. First purchase I've made from SPV, and I couldn't have been more pleased!
Just wanted to give a shout out in regards to the SPV Parts 2021+ Ford Raptor OEM Fog Light Upgrade Kit with Brackets & Rigid SR-M Direct Replacement Lights I recently purchased and installed.
What I was looking for were replacements that match the stock look, but with higher output. That is...
Back in 2000 I received a nice set of folding chairs.
Of course you should have some FordPass points you can redeem for accessories or swag. IMO that's a better option, if you take advantage of it. I'd rather have the ability to choose what I want, as opposed to being sent something random that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.