Search results

Have you checked out the Toyo R/Ts, Nitto Ridge Grappler or the new Recon Grappler? They are probably some of the most aggressive A/T tires.

I had a 5 star tune on my gen 1 and it would definitely burn them but would have bad axle hop.

It’s called torque management even with traction control in any setting it will not let you do a burn out. Sometimes you might be able to do one if your on a slippery surface. A tune will change that for sure.

Brew City Boost

Best way would be to reset adaptive learning. Easy to do if you have a tuner if not just unplug the battery for 10 min and it should do the trick. After it’s reset drive it to your liking.

It just adapts to your driving try driving it “differently” than normal for the first 100 miles or so see if that will do the trick.

I would try resetting the trans Keep Alive Memory from your access port see if it relearns.

I used an SCT tune on my gen 2 for a couple of weeks before I got my Cobb tuner. SCT and Bullydog are one company now pretty sure they share the same tunes. It worked well definitely gave it a power increase.

What Cobb TCM tune are you running?

Third brake light SOLD. located 50 miles from El Paso, TX

I installed a carbon fiber wheel on my gen 1. It was pretty easy no puller required. There is a few videos on YT

If you lost 23lb per corner of unsprung weight it would be equal to dropping around 300lb of sprung weight. Translates to like 3 tenths faster in a quarter mile.

Bullydog and SCT are now one company. They use canned tunes that work ok but your better off getting a tune from a reputable shop. Goose tuned only works on Cobb AP. There are a lot of shops that will write you a custom tune for the SCT/BD device.

I believe you can use the custom maps as long as they are for the same year of trucks. 17&18 are the same where 19 and up are different.

Dirt Kartel 3rd brake light with BD s2 lights used for a few months before traded in my truck works as it should $425 Steering wheel $150 will ship on your dime

SOLD

Yes the harness is simple and makes everything plug and play.

Negative these are plug and play for 13-14. 10-12 requires a harness to run the factory HID lights. Morimoto is the company that makes the harness.

I have a set of 13-14 HID headlights they are in nice shape no broken tabs accident free. Lens could use a cleaning. They have new 5k Dynamic Diode bulbs installed. These lights are complete. Asking $650 plus shipping. Located in Las Cruces, NM.

VAS Specialties is supposed to be releasing a set of traction bars for Raptors. They should be affordable as their regular F-150 kits start at $375.

That was with oem shocks

I had a similar noise once when I accidentally installed the coil mount wedge incorrect. The spring was coming into contact with the shock.

It’s definitely possible I mean there’s boats that come with the 6.2. Pretty sure they are not running a BCM either. https://www.supraboats.com/power-performance

Sold

Gen 1 third brake light. $200 + shipping