Search results

Bump for revised description and pics Oem Ford F-150 brake calipers. I used these as temp calipers on my 2011 Raptor while I refinished mine. Rear Calipers came from a 2004 F-150 Front Calipers came from a 2011 F-150 and fit 10-11 Raptor, 10-15 Navigator, 10-15 Expedition, and 10-11 F150...

I am right handed and I've been practicing drawing with it mounted like that. Its actually pretty smooth. I'd suggest trying it first Sent from my iPhone using Tapatalk

Shifter parts were easy. There's some YouTube videos on how to do it. Door handles were a little bit of a pain. Take them completely off the door and work them on the bench. Getting the spring out is easy just make sure you keep your hand or a rag over it so it doesn't come flying out...

Oem Ford F-150 brake calipers. I used these as temp calipers on my 2011 Raptor while I refinished mine. Rear Calipers came from a 2004 F-150 Front Calipers came from a 2011 F-15 and fit 10-11 Raptor, 10-15 Navigator, 10-15 Expedition, and 10-11 F-150 They don't look that great but work...

I have a set of stock UCAs that I bought from another member. I bought them thinking I was going to install them so I could polish mine up and then swap back. Ended up deciding to just go with aftermarkets. These have been sand blasted, cerakoted silver and then coated with cerakote clear...

Id make sure you have the pads installed correctly. The one with the double jump goes on the inside. See this thread http://www.fordraptorforum.com/f195/psa-raptor-front-brake-pad-installation-issues-43316/ Next make sure all metal on metal contact areas are lubed. Back of the pads where...

Well I guess I can't complain too much. Mine isn't as bad, just annoying to have to hit 2 buttons every time I get in the truck. I really wish someone would come out with an apple car play upgrade for the early gen 1 Sent from my iPhone using Tapatalk

Hey guys I use an iPod as my music source in my truck. I leave it plugged into the USB port 100% of the time and about 80% of the time when I start the truck there is no music playing. I have to hit the user device icon then the source line button. It's strange because sometimes it will just...

It's a console vault. Bought it on Amazon I generally carry it on my waist too but for longer drives it's nice to have it out of the way Sent from my iPhone using Tapatalk

Thanks man!! Sent from my iPhone using Tapatalk

That seems pretty high. It's not that bad to do it yourself. I watched the video o the rpg website and did it that way. Wasn't too bad. You can rent the spring compressor from any auto parts store, usually for free. Then all you need is a socket and ratchet. I'd suggest soaking the set...

Just talked to the dealer. 73 bucks to remove and install new ones. Can't beat that Sent from my iPhone using Tapatalk

Has anyone replaced their lower ball joints? I'm looking at doing mine and wondered if it's worth it to have a shop do it or tackle it myself. I have the tools and shop space and the LCA's are off the truck I'm just nervous about damaging the LCA while doing any of the pressing. Also did...

I've got a set of uppers in the same condition in the Seattle area. Both are cerakoted silver with a clear coat. Sent from my iPhone using Tapatalk

Anyone know what the stock spring length is? I'm looking for the uncompressed length Thanks Sent from my iPhone using Tapatalk

I did pay for them. I found them on boltdepot.com. Ended up costing $33.00 for 100 bolts and washers. However the shortest ones they have are 12mm which is about .500in and I hade to cut them down to about .250in Fortunately I have a lathe and was able to do it pretty easily. You might be...

I replaced the zinc coated bolts from my method wheels with stainless ones. If anyone wants or needs some replacement bolts I'll send them out. They're about 10 months old. Just pay shipping Sent from my iPhone using Tapatalk

Looking for Stock calipers for 2011 raptor. Need to be in good mechanical condition. Fronts or rears or both Sent from my iPhone using Tapatalk

I used the standard mag pouch that you get from Springfield. Drilled 4 holes common to the belt loops all the way through the part. Then used that as a template to drill through the lid. Then 4 rivets to hold it on Sent from my iPhone using Tapatalk

I would never leave it there unattended and if I get out it either goes in the safe or on me. And I'm not too concerned about having to draw it from the holster and it is a faster draw than it being on my waist. it's more of a storage spot while driving. It's not cluttering up the console or...

De-chromed the interior. Hydrodipped the door handles and shifter trim. Painted the console trim with some smoke colored plasti-dip. Also mounted extra mags inside the console vault and found an easy and removable way to mount my edc under the steering wheel. A typical paddle holster slips...

I pulled my exhaust tips off and cerakoted them tonight. I think they came out pretty good This is what I started with Sand blasted Armor black finish Also did the clamps in shimmer aluminum Sent from my iPhone using Tapatalk

Thanks. If you have any that are blank I'd be interested Sent from my iPhone using Tapatalk

Are the logos laser etched into the face or are they actually machined in? Sent from my iPhone using Tapatalk

You can also use cerakote clear and do it yourself if you have an air compressor. just clean and mask any surfaces and spray. The clear is an air cure and its pretty durable. i'm planning to clean up my UCA's and clear coat them.