Recent content by Jhollowell

Wow i didn't know SDHQ had one of these. I've been wanting to do something like this for a while since i ground most of my electronics to the negative terminal. Knukonceptz has a kit as well that i've been eyeing but everything is working right now so i'm reluctant to change things up. the...

2 different styles of 3rd brake light for Gen 1 Raptors. Comes with gaskets, hardware, and wire harness for the S2 Lights. These are plug and play and don't require any drilling, cutting or splicing. Just unplug your OEM harness from under the headliner and plug this one in, run the wire...

I've tried a couple different shim stacks and never felt much difference from stock. I'd say unless you add some ports and shims to the bypass tube, you won't feel much difference. But i'm not a suspension expert.

i could try that. i'm tempted to pull the drive shaft completely and drive around in 4hi and see if i still get the clunk.

Yep. I have those two parts. The mystery part is a bent bracket thing. Looks to be about 1/4” thick with a few holes. Maybe it came off when i did the frame cut front bumper? I haven’t removed much else except that weight on top of the frame. I should label stuff when i remove it and not...

i think you need to stick with the Gen 1 spring unless the gen 2 top hat is compatible with the new coil buckets. you may want to look at re-valving the shocks too as they are probably a bit soft for the gen 1 (heavier) truck especially with the stiffer gen 1 spring.

Is this the only piece to the spare tire winch? I'm putting mine back on but i found another bracket in the "raptor parts bin" and don't know what its from.

I'll be curious to see how long the slip yoke clunk stays away. i've greased mine a few times with different grease and it always comes back within a few days. Few months ago i replaced the entire yoke and U Joints hoping that would solve it and it partially did. When it rains or its wet...

sorry, not making these anymore. Just brake lights now

i've found a few https://www.fordpartsonsale.com/oem-parts/ford-spare-tire-hoist-mc3z1a131a?srsltid=AfmBOoqjzU-RDjP29hQa3dl_LNyASgkCT75IT81i7vc0pAlpi-Pmsptq https://www.fordpartsgiant.com/parts/ford-spare-wheel-mounting_9l3z-1a131-a.html https://www.amazon.com/dp/1L3Z1A131A/?tag=fordraptorforum-20

Prototype fog light bracket for us guys with frame cut bumpers. Attached to the sub frame and has slots for up to 3 Squadron lights.

I just use a piece of 1/2” thick aluminum plate with a 3” hole in the middle. Seems to work for everything i use it for

My truck sits pretty level and i know i said earlier i was on Deaver +3 but it may be +2. its been so long i don't remember but it should be whatever is close to stock. I haven't done anything crazy with my suspension aside from springs and keeping my shocks fresh. I did geisers at a local...

That sucks about RPG. It looks like Evil is rebranding to “whoop junkies”. Looks like they are just a reseller based on their website https://www.whoopjunkies.com/shop-3

I've always wondered what the minimum oil volume before catastrophic failure is. There is always margin built into everything so i'm curious what the engineers built into motors. You have to assume people will mess up or go too long between changes so i'm curious, will it run on 2 quarts? 4? 5?