Recent content by GregFoutz

The new Gen 3 Alcon brake kits now in stock. Get yours today

hey Good Morning.... whats up.

well you got me on that one..... I sure am.

maybe. you do have to take the nut off the back side of the rear lower arm mount to put the support brace in there, but if you are careful and mark the bolt location so you can make sure it doesnt move you wouldnt need to re-align it after.

yes 100% bolt on

its really a pretty easy fix if you are super concerned about it. add some material to the axle bump pad to raise the height there and you can get it to match perfect if needed. Just add to the top of the existing plate. Could cut a piece of aluminum the correct height to compensate and bolt...

the bump stop is timed to work with the 35" tire truck which has a little more up travel. if you put the same bump stop kit on a 37" tire truck and the shocks stop the up travel earlier than the 35" tire truck then the bump stop never travels 100%.

The factory setup on the trucks with 37" tires do remove about 1" of wheel travel on the up stroke. The shocks are limited to stop a little earlier to try and keep the tire out of the fender... We made the bump stop kit work based on the 35" trucks so it just doesn't use the last little bit of...

The quality of the Alcon components is unrivaled in the brake industry. They do cost a little more than other options but worth paying the price once to get the best possible parts.

Front kit only at this time. Kit has everything you need to install. pictures show all the core parts then plus a few bolts to mount the calipers to the adapters Here is the standard Alcon warranty. PDF attached

That's the standard retail price on all of their full production front brake kits with 6 piston calipers. https://alconusa.com/collections/complete-brake-kits?page=3

I looked at my profile and I was member number 53 to this forum so one of the first to join. But yea we are supporting vendors for the forum. and happy to support the group

We have a kit for the Gen 3 that uses the stock lower arm and you can add bump stop. installing on my Gen 3 the end of this week and then we will release for sale. looks very much like our Gen 2 kit we just rolled out...

The new Alcon front brake upgrade for the Gen 3 is now available. We have early access to the first production shipments coming in and will be ready to ship in march. We will have the only kits available from the first run if anyone wants to get some. I was fortunate to help with the kit...

I think we are a vendor.......