Recent content by Great Scott

I'm looking for a front bumper in excellent condition (no scratches or rock chips) and located in Texas as well.

Still interested in selling this or is Fort Worth too far away?

PM'd you!

The stealth version of the XPEL doesn't stretch as much as the normal shiny version. This could be a contributing factor.

Looking for a Gen 3 OEM front bumper without any damage to it. Presumably someone who almost immediately put on an aftermarket bumper after buying a new truck. Thanks!

I'm interested in the front bumper. Brand new as in how many miles driven? I'm looking for an almost good as new bumper I can PPF

This happened to me for the first time about 3 months ago. Maybe 8k miles on a 22. It was so loud, I'm sure I suffered some hearing loss before I figured out I couldn't turn it off and got out of the truck. It took 20min for it to stop. Turned the truck on and off several times. Ultimately...

Yeah there's something amiss here. Check all the hose connections for leaks. I installed a CVF intercooler with a stock tune and the truck runs better, idles smoother, and MPG is more consistent.

Ah okay. And with the SAE S2 kit, both pairs are wide cornering yes? And you can't stagger amber with white in the kit it looks like. Just both pairs amber or both pairs white?

What would be the major difference between this design and the S2 pro kit linked here https://www.4x4truckleds.com/baja-designs-dual-fog-pocket-kit-s2-pro-for-2021-ford-f150-bronco-raptor/ ?

Mine does this. I believe it’s the transmission skipping gears as it doesn’t go through 1-10 in order. It’ll skip lower to mid level gears depending.

None of the above. I just installed the CVF titan 2 in the stock location. No trimming on the Gen 3. Took 3.5hrs and the last hour was me just wedging it up into place with a jack. I noticed an immediate difference in drivability. Even the idle isn't as rough now. I live in Texas and the heat...

Yes on the Gen 2's you have to trim .25in I've seen reported. Gen 3 you don't but CVF really utilized every mm of space in that area to size that IC.

As Archer would say "phrasing"... But, yes, I updated my first post to say that's what I effectively did. It's possible to do all of this by yourself and without a lift. Is it optimal? Probably not. It took about 3.5hrs and the last hour was me determining that the IC wasn't pressed up into the...

I think so. I moved them from the old IC to the new IC accordingly. It's just a very very tight fit to get the grommets in the upper part. I used a 1/4in thick neoprene washer to fix the fan assembly spacing as opposed to metal.