OEM Ford Raptor Steering Knuckle Part #s:

Big Blue · May 27, 2014

Hello All,

Just wanted to post this up as I'm sure someone else may need a set for replacement or as a spare.

There are 3 versions listed, but the Raptor versions are Parts #;

Left side: AL3Z-3K186-D List price: $173.73, Tascaparts.com price: $114.66

Right side: AL3Z-3K185-D List price: $173.73, Tascapart.com price: $114.66

Huck · May 27, 2014

that seems really inexpensive

Sano Dano · May 27, 2014

Knuckles

I ordered the stock F150 knuckles, they are about $20 cheaper each, only difference is you will need to tap a few 6mm holes. The caliber bolt holes are the same size.

I added the gusset kit from Outlaw and drilled out the top mount from 5/8" to 3/4" to mate with the RPG UCA.

Mil T · May 27, 2014

Look on Ebay. You'll find them cheaper there. They are all the same. F150 and Raptor.
Mil T

Sano Dano · May 30, 2014

Sano Dano said:
I ordered the stock F150 knuckles, they are about $20 cheaper each, only difference is you will need to tap a few 6mm holes. The caliber bolt holes are the same size.

I added the gusset kit from Outlaw and drilled out the top mount from 5/8" to 3/4" to mate with the RPG UCA.

Installed my new Knuckles today.....with new 3/4" 12 point bolts and spacers, Minimum tensile strength is 170,000 psi on the bolts.

Had to grind about 5/16" off (note screwdriver in 3rd pic) to clearance the spring on the FOX 3.0s. You can see the issue in the 2nd pic.

Mil T · Jun 1, 2014

Looks good. How did you do the welding? Mig, Tig, Arc?
Were the braces actually hitting the spring? Kind of weird. I didn't have any problem with that at all when I did mine.
Nice job you did.
Mil T

Sano Dano · Jun 2, 2014

Mil T said:
Looks good. How did you do the welding? Mig, Tig, Arc?
Were the braces actually hitting the spring? Kind of weird. I didn't have any problem with that at all when I did mine.
Nice job you did.
Mil T

At full extension they were hitting the springs....Talked to Connor at Outlaw, he though that maybe FOX had changed the springs on the new 3.0s, has a call into them to see, but not likely.

I had them Tig welded....

TXRPTOR37 · Jun 4, 2014

Does outlaw sell there gussets welded to the knuckle for additional $$ or are you on your own to figure out who can weld them?

Sent from my iPhone using Tapatalk

Sano Dano · Jun 4, 2014

TXRPTOR37 said:
Does outlaw sell there gussets welded to the knuckle for additional $$ or are you on your own to figure out who can weld them?

Sent from my iPhone using Tapatalk

Outlaw will do it for you....or most fab shops can also do it.

matdaddy · Aug 31, 2014

Awsome thanks!

OEM Ford Raptor Steering Knuckle Part #s:

Big Blue

Administrator

Huck

FRF Addict

Sano Dano

Full Access Member

Mil T

Full Access Member

Sano Dano

Full Access Member

Attachments

Mil T

Full Access Member

Sano Dano

Full Access Member

TXRPTOR37

Full Access Member

Sano Dano

Full Access Member

matdaddy

Member

Similar threads

Members online

Forum statistics

Latest posts