Wiring invisa cord to rear view mirror (need help)

GTS RAPTOR · Apr 16, 2010

On my 6.2 the rear view mirror has a 7 pin connector.
I don't have the rear back up camera.
I read on MMD's thread before it was deleted on the failedZ forum about installing the invisa cord
to a 16 pin and 10 pin connector rear view mirror.
I thought my 6.2 would have a 10 pin connector since I don't have a rear back up camera on my rear view mirrow, so when I went to install the invisa cord I was suprised to see a 7 pin connector.
So now I don't know what to do, I think the pin 1 positon is the power wire it's blue with red stripe, but I don't know which one for sure is the ground wire, there is a solid black wire which I suspect could be the ground but I'm not sure so I didn't install the invisa cord for my radar detector I'm just running the power cord that came with it for now.
Does anybody know which is the ground wire on a 7 pin connector?
Or is there a wiring diagram somewhere for a 7 pin connector?

MarkT · Apr 16, 2010

I wonder if they moved the SYNC mic out of the rearview mirror? First I've heard of a 7 pin... hopefully FSM can help?

FSM06 · Apr 16, 2010

Pin Circuit Gauge Circuit Function Qualifier
1 CBP41 (BU-RD) 18 FUSE - 41 OR CIRCUIT BREAKER
2 CET47 (BU) 22 REVERSE LAMP RELAY COIL +
3 GD147 (BK-VT) 22 GROUND - PILLAR C LEFT
4 LRD12 (BU-OG) 22 CTRL MOD. - ELECTROCHROMIC MIRROR
5 RRD12 (BN-WH) 22 CTRL MOD. - ELECTROCHROMIC MIRROR
6 VMC31 (GY-BU) 22 COMPASS MOD. # +
7 VMC30 (BU-GY) 22 COMPASS MOD. # -

This should help GTS. Looks like pin 3 Black and Violet is your ground and pin 1 Blue and Red is your power circuit,

FSM

MarkT · Apr 16, 2010

:rep:

GTS RAPTOR · Apr 16, 2010

Thanks FSM that helps alot!:thumbsup:
And yes MarkT, on my 6.2 raptor the sync mic is on the head liner next to the overhead console, I'll snap a picture of it tomorrow and post it up here.

frogslinger · Apr 17, 2010

GTS RAPTOR said:
Thanks FSM that helps alot!:thumbsup:
And yes MarkT, on my 6.2 raptor the sync mic is on the head liner next to the overhead console, I'll snap a picture of it tomorrow and post it up here.

I saw on here somewhere that there was a bulletin out for retrofitting a headliner mic... is that accurate or am I misrecalling?

FSM06 · Apr 17, 2010

frogslinger said:
I saw on here somewhere that there was a bulletin out for retrofitting a headliner mic... is that accurate or am I misrecalling?

Frog, that was for an additional mic other than the one that is integral to the rearview mirror. The option on the truck above is a simple electrochromatic mirror with no back-up camera function. That mirror option does not have a sync mic in it. That is why it is only a 7-pin connector. Clear as mud??

FSM

GTS RAPTOR · Apr 17, 2010

Thanks again FSM, I got the invisa cord hooked up and it works great!

And here's a pic of the sync mic location in the headliner.

Falcon · Apr 18, 2010

GTS RAPTOR said:
Thanks again FSM, I got the invisa cord hooked up and it works great!

And here's a pic of the sync mic location in the headliner.

GTS,

Did you know that you can hover your pointer over a picture when you are composing it, and you will see a little pencil in the top left corner of your pic?

Note: You have to be in 'Go Advanced' to do this.

View attachment 196

Click on it and it will bring up this popup:

View attachment 197

There you can set the size of the enbedded pic, add notes to it, etc.

Just in case you didn't know.

Falcon

GTS RAPTOR · Apr 18, 2010

Thanks for the heads up Falcon, I'll try that next time I post pics.

Wiring invisa cord to rear view mirror (need help)

GTS RAPTOR

Full Access Member

MarkT

FRF Addict

FSM06

Full Access Member

MarkT

FRF Addict

GTS RAPTOR

Full Access Member

frogslinger

Full Access Member

FSM06

Full Access Member

GTS RAPTOR

Full Access Member

Falcon

Full Access Member

GTS RAPTOR

Full Access Member

Similar threads

Staff online

Members online

Forum statistics

Latest posts