Reply to thread

Message: <blockquote data-quote="KingKoopa17" data-source="post: 2075542" data-attributes="member: 39192">Finally got around to installing the Spicer rear diff cover this morning.[ATTACH=full]473726[/ATTACH][ATTACH=full]473727[/ATTACH]Snapped three bolts off, so that was plenty fun. The one on the bottom was definitely the most difficult, I slowly worked up to a 3/16" drill bit plus some heat and a lot of persuasion to get the thing out. The top two were surprisingly not too horrible. A lot of patience was involved for all three, but it worked out. I used the ARP bolts that have been mentioned around here, a lubelocker gasket and Amsoil 75w-90. Torqued to 33 ft-lb. I'll be doing the front with another Spicer cover, but that might be awhile.I also drained and filled the transfer case and changed spark plugs. I used the SP594s. At 43k, I didn't think they looked too bad, but the new ones got some anti-seize.I also hit the underside with the B'laster Surface Shield last week. We'll see how it holds up this winter. On a final note I wanted to mention that the buzzing I was hearing from my new-to-me shocks I installed last month finally went away. I'm wondering if it went away after the truck settled from when I installed the Icon leaf springs.</blockquote>