Reply to thread

Message: <blockquote data-quote="mleaky" data-source="post: 2093160" data-attributes="member: 72933">Installed some Baja Designs LP4's.-SDHQ A Pillar Ditch Light Brackets-Baja Designs LP4's, amber backlight-SPV A Pillar harness. Ran the harness under the cowl and in between the fender where it mounts, towards the A pillar.-SPV running light harness-ARP 12pt Bolts and Nuts. The plan was to lockwire the bolts, but I broke the only 1/16 bit I had. -Used some left over Gray Techflex and Shrink tubing from a KTM wiring project -4 way zip tie mounts and zip ties. Mounts are under the cowl.Running light harness routing under the plastic cover[ATTACH=full]481715[/ATTACH]Laying the A pillar light harness location[ATTACH=full]481716[/ATTACH][ATTACH=full]481717[/ATTACH][ATTACH=full]481718[/ATTACH][ATTACH=full]481719[/ATTACH][ATTACH=full]481720[/ATTACH]Prettied up the light harness a bit[ATTACH=full]481721[/ATTACH]LP4's with ARP Hardware(Orange Locktite)[ATTACH=full]481722[/ATTACH][ATTACH=full]481723[/ATTACH][ATTACH=full]481724[/ATTACH]Final Product. Just need to adjust the lights a bit more and buy the LP4 side reflector covers.[ATTACH=full]481725[/ATTACH]</blockquote>