What did u do to your raptor today?

[Frank M]

The skid plate

 

[CoronaRaptor]

Painted my skid plate / A friend CJ (six gun customs) modded my SVC bed rack. View attachment 161469View attachment 161470View attachment 161472View attachment 161474

That's quite the transformation, looks very useful now!

 

[MEIRONMAN207]

The new U joints and new flange bolts came in late and pouring rain, so tomorrow I can bolt and button up the driveshaft! But I couldn't completely wait, so on my original flange yoke that I clearly cleaned up, painted, lightly smoothed and greased where the cups make contact. I slipped and tapped right in the new u joint. (careful not to be too graphic in case children were around). TBC

 

[matrix243]

Emptied the passenger side oil separator. 1,855 miles. As expected, the driver's side was bone dry.

Wonder if mine is hooked up right. I don't get anywhere near that much. 100k miles

 

[COBRA90GT]

^ Passenger side PCV catch cans will usually collect a decent amount of oil in between oil changes IMHO; I had about the same amount in mine just prior to my last oil change (guess it depends on the mileage as well, YMMV).

Post up a pic of your setup, maybe a hose is kinked (?) or the design of the particular brand/model is coming into play...(?).

 

[pat247]

I can only go about 1500 miles before I have to empty the Moroso oil catch can on my Raptor so that means 3 times between oil changes. That is why I run the acrylic cup so I can see when it needs to be emptied.

 

[laselvasurf]

Washed both beasts(X5M, Raptor), detailed the insides, then plastidiped the wheels and wheel arches on the raptor.

Here's a before on the wheels:


During the process:


And a couple finished shots:



Today I'm going try to replace the front wheel hubs, IWE actuators and calipers. I have one caliper that's sticking and the IWEs made some funky noises while off-roading in the snow last weekend.

 

[Gary E]

Washed both beasts(X5M, Raptor), detailed the insides, then plastidiped the wheels and wheel arches on the raptor.

Here's a before on the wheels:


During the process:


And a couple finished shots:



Today I'm going try to replace the front wheel hubs, IWE actuators and calipers. I have one caliper that's sticking and the IWEs made some funky noises while off-roading in the snow last weekend.

Is what you are saying is that you painted them?

 

[badm0t0rfinger]

Is what you are saying is that you painted them?

He plastidipped them. Like he said in the post.

 

[CoronaRaptor]

Is what you are saying is that you painted them?

It can be peeled off, unlike paint!