Upgraded Wheel Question

[Zeusmotorworks]

Hi, I have a 2020 Leadfoot with the standard wheels. They're ok but I dont love them. I kinda wish I could have got the upgraded wheels, but I got a pretty good covid deal last May and it was the only one really available willing to deal.

Same boat. Last June I got a great COVID deal on my 2020 802A in the Velocity Blue color I wanted (never had a blue vehicle). However, it didn't have the beadlock ready wheels. I REALLY like the look of the 19/20's and figured I pick a used set up later. Problem is I don't like the look enough to pay more than the cost of six bead grip Methods for them! And the Methods are lighter to boot. Right now I'm just waiting for the model I want in a soon to be released Raptor friendly offset.

 

[Olsen Motorsports]

17/18 beadlocks on the lead foot looks amazing IMO here is ours!


Sent from my iPhone using Tapatalk

 

[MG21]

17/18 beadlocks on the lead foot looks amazing IMO here is ours!


Sent from my iPhone using Tapatalk

look good! There is a set near me of the 18’ bead locks for $1750 w tires.

they both look good I go back and forth.

 

[Olsen Motorsports]

look good! There is a set near me of the 18’ bead locks for $1750 w tires.

they both look good I go back and forth.

I’ve got three sets. IIRC I was paying 900-1200 a set for them? No tires just wheels. The big ticket is the TPMS as that’s over $400 from the dealer I think? So 1700 with Tpms and tires is a pretty darn good deal?


Sent from my iPhone using Tapatalk

 

[NASSTY]

I’ve got three sets. IIRC I was paying 900-1200 a set for them? No tires just wheels. The big ticket is the TPMS as that’s over $400 from the dealer I think? So 1700 with Tpms and tires is a pretty darn good deal?


Sent from my iPhone using Tapatalk

Dealers are a rip off on TPMS. I had one replaced at the dealer once and they charged me $90 just for the TPMS. It was convenient to get it fixed right then and there so I didn't mind paying it. But I also bought a new set of 4 OEM TPMS on Ebay for $50.

 

[Olsen Motorsports]

That’s true. But I have noticed the OEM TPMS is usually more reliable. Less drop out etc. Especially the Audi ones


Sent from my iPhone using Tapatalk

 

[Mister Pinky]

I don’t hate the standard alloys. The beadlocks with the beauty ring look **** but they’re a no go in rust land.

 

[NASSTY]

That’s true. But I have noticed the OEM TPMS is usually more reliable. Less drop out etc. Especially the Audi ones

The 4 for $50 ones were OEM. They are all over Ebay.

https://www.ebay.com/itm/4-NEW-OEM-F2GT-1A189-AB-TIRE-PRESSURE-SENSORS-2015-2018-F-150-EDGE-MUSTANG/171889613623?fits=Model:F-150&_trkparms=ispr=1&hash=item28056b5b37:gf8AAOSwDNdVy0e3&amdata=enc:AQAFAAACcBaobrjLl8XobRIiIML1V4Imu%2Fn%2BzU5L90Z278x5ickkSG%2BOFgrj2Yvbvmrj2TAdM205iqNkhHm3p5SuMo%2FTX2N01swrVlWl5LoUhUsqZizqmRtVO9xTioDAbRkh62d3Ex6jEGGlT3GMCSGZLegK%2BFyvKtzzSA6KiZoMrJvKLXclavIfZ9wU%2F6ZuWe9ZOsv0Y5jTrDLd5We5IS4XZbrqek00kMgav4ibzZyeW1B0LtbQki9yddgG3UckvwTDRf1dz72wKDIv%2BI92B%2F1parficfhUvronhISkD%2BHbYET4KzGM0O0sLiLrHCnYxjO9GbSOTWAXM7%2BqArWvrnAXX3hbd5nPWYJ85uy2Dm4bXCrM1upGg7h9X6jdHoXsk4wTEF1ozWLsYtsuh2UbU1EUV57jzFk06pR%2Fn6HOzcGUcTmnhDWI5idJ0mUO7803%2FzJkth2Dc%2FmBgu4c7kjosW7P6mTixzPqCHDcOBQmg%2Bo2ovtoN9l3RDBt%2Fps0ZKqUIt1gvQkxDmrJJ7LtDzCVNgq%2F61x1nty0UkrCqx5f08KAuYz5dVcSCA3ckRQGc%2BEQrov3I2y2%2Ba9lkiaejF8yy7RCmeDd6N7jz2zvB85LXYfoc8%2FY9SzojfOhWZFcW2RWJCJahR%2FS0qWzALtHvA09Mt%2F312wCmh0pzCwzuAT3DBd9RMhLf0J1wAtHRVciSKzYq4GRl%2FoGhVRhuqbl%2Fj6xC8S%2BsoRpy7pyNLn0DIAbbn%2FecwOIyW30kNhwPJtRaCYoP1U43YsApqHkveSbXqtnEF4Z1Fhi%2FfpTMGjCjuSUPJuPQTmzb6DlWPFAPmwwemqNNgmAuPKEXA%3D%3D|cksum:17188961362338b51c9a6b50413eb91e9fb8a4e1efe5|ampidL_CLK|clp:2334524

 

[ayoustin]

YES!! Exactly!!

View attachment 164437

I keep going back and forth about if I want to put on the gen 1 beadlocks I kept when I traded my gen 1 in or keep the new beadlocks on my 20. I can't seem to find anybody who's put the gen 1s on an oxford white gen 2 yet, unfortunately. If I could find someone local with some garbage tires to toss on them then I could test fit them to see if I prefer them.

17/18 beadlocks on the lead foot looks amazing IMO here is ours!


Sent from my iPhone using Tapatalk

Those look good! Are you running a spacer or is it a wider tire? I don't recall any factory wheel being that aggressively poked out.

 

[DFS]

I keep going back and forth about if I want to put on the gen 1 beadlocks I kept when I traded my gen 1 in or keep the new beadlocks on my 20. I can't seem to find anybody who's put the gen 1s on an oxford white gen 2 yet, unfortunately. If I could find someone local with some garbage tires to toss on them then I could test fit them to see if I prefer them.




Those look good! Are you running a spacer or is it a wider tire? I don't recall any factory wheel being that aggressively poked out.

I believe that is the beadlock ring making the tire stick out a bit further. Though the actual offset is no different.