Triple Bezel Fog Lights - No Longer Working

[Imoxfordwhite]

Raining cats and dogs here in Houston this week and I had to unfortunately venture out yesterday. I was driving down a dark side road when I noticed only 1 single fog light was working. (Out of 6)

Everything was working perfectly last week when I tested them, normal conditions.

I have them wired up :

Aux 1 - two outer small lights
Aux 2 - two middle lights
Aux 3 - two inner lights

What's throwing me off is only one light works when I have Aux 1 activated and I get nothing when test 1,2,3. (I've tried multiple combinations with no success)

Any idea where to start or what's the potential issue?

Kit:
OFFROAD ALLIANCE - TRIPLE BEZEL FOG LIGHT KIT W/ BAJA DESIGNS SQUADRON PRO

 

[TheTeej]

Fuses for the switches maybe? You could try swapping the harness around at the working light to see if it works on the other switches.

 

[DanT]

Check your fuses - double check your connectors to the switches - I had a bad one and kept blowing the fuse

 

[REX111]

Check your grounds too.

 

[Imoxfordwhite]

Check your fuses - double check your connectors to the switches - I had a bad one and kept blowing the fuse

Appreciate the suggestions

 

[REX111]

It’s a light bulb. It only needs 12v and ground to light up. If you do have 12v and ground at the bulb then the bulb is most likely bad.

 

[Winchester30]

“Any idea where to start or what's the potential issue?”

How about starting with OFA customer support, they’re excellent.