Toyo MTs rubbing?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

toolfan94

Member
Joined
Feb 11, 2014
Posts
14
Reaction score
1
Location
Eagle Pass,Texas
Hey guys,I recently put some 35" Toyo MTs on my 13 SCREW and I'm loving the nice aggressive look but for some reason they rub on my inner fender lines when ever i make a full right or left turn. Is this normal or could an alignment issue be the culprit? By the way I'm also running OEM wheels and on stock perch.
 

Huck

FRF Addict
Joined
Aug 26, 2012
Posts
4,208
Reaction score
1,839
Location
Chicago Sw Burbs
Yeah they will rub a bit on stock wheels.

If your all stock thats the problem. Otherwise caster can be an issue.
 

oxfordraptor

FRF Addict
Joined
Apr 11, 2013
Posts
2,660
Reaction score
2,525
^ Is that only Super Crews or only with stock SVT wheels and not the beadlock capable wheels? I have 35x12.5x17 Toyo Open Country MT's and no rub on bead lock capable wheels truck is a SCAB
 

Madcowranch

Genetically Modified
Joined
Sep 16, 2010
Posts
7,303
Reaction score
5,168
Location
OK
Hey guys,I recently put some 35" Toyo MTs on my 13 SCREW and I'm loving the nice aggressive look but for some reason they rub on my inner fender lines when ever i make a full right or left turn. Is this normal or could an alignment issue be the culprit? By the way I'm also running OEM wheels and on stock perch.

Go to mid perch
 

LS3 CJ7

Full Access Member
Joined
Apr 9, 2014
Posts
102
Reaction score
17
Location
Ponte Vedra Beach, Fl
I have 35" Toyo MTs on 18" BMF novakanes with no rubbing. I'm at factory perch but considering mid perch


Sent from my iPhone using Tapatalk
 

WNCHSTR96

Full Access Member
Joined
Nov 21, 2012
Posts
628
Reaction score
1,285
Location
Athens, Alabama
Is it in the inside front corner tabs of the front fender wells? If so that's seems to be a common issue and can be corrected by either trimming the plastic a little or as I did, just drill a little hole in the liner and attached some fishing line to keep the corner pulled fwd some. Mine (stock tires) would rub when turning after long interstate trips. REALLY loud when backing BTW. (I think it was mentioned in another thread, hence how I found out)
 

Madcowranch

Genetically Modified
Joined
Sep 16, 2010
Posts
7,303
Reaction score
5,168
Location
OK
Is it in the inside front corner tabs of the front fender wells? If so that's seems to be a common issue and can be corrected by either trimming the plastic a little or as I did, just drill a little hole in the liner and attached some fishing line to keep the corner pulled fwd some. Mine (stock tires) would rub when turning after long interstate trips. REALLY loud when backing BTW. (I think it was mentioned in another thread, hence how I found out)


Mine too. http://www.fordraptorforum.com/f39/loud-rubbing-noise-when-turning-2258/
 

Luke13

Full Access Member
Joined
Mar 12, 2013
Posts
122
Reaction score
56
Location
Norco, Ca
Mine too, I'm on methods however on mid perch


Sent from my iPhone using Tapatalk
 
Top