Reply to thread

Message: <blockquote data-quote="dsiggi" data-source="post: 1948969" data-attributes="member: 25674">I think offroad alliance has a video showing how to replace these bed nuts without any of the bed lifting etc...  I just pulled my rear most bed bolts to re powder my bed supports and install d rings.  I sprayed them like crazy with corrosion x and used the TP-50 and a breaker bar and went real easy and direct when i broke them loose.  I put heat on the driver side bolt with a torch because i didnt like the way it felt with the breaker bar and it came right out no issue.  Just be patient. I'd stay away from impacts, and do this all by hand.  I use impacts often but there is a time and place.  Seen them cause many more problems that taking a few minutes by hand would have solved.Also fwiw, reused bed bolts and nuts many times.  I know your not supposed to but its not the apocalypse if you do.  I did replace this time when I redid bed supports and d rings.</blockquote>

Total: 2,245 (members: 29, guests: 2,216)