GEN 2 TerribleONE's 2020 build thread

[TerribleONE]

I went with the Anthracite Gray finish with black Techlite rings. My truck is Agate Black so hoping it will look good, we should find out in a couple more weeks.

Nice I am sure it will look great!

 

[405]

Also wanted to ask you, how are you liking the Toyos on the street? Compared to the BFG K02.

 

[TerribleONE]

Also wanted to ask you, how are you liking the Toyos on the street? Compared to the BFG K02.

Sorry for the delay havent been on here much. I am super happy with them. They are only slightly louder for a much more aggressive/true 35" tire. Perfect happy medium tire in my opinion.

 

[TerribleONE]

Finally got the rest of my parts in and was able to get everything installed. Super happy with the KHC front and rear bumps as well as the rear suspension setup. So far I am not very happy with the springs up front. Soaks up bigger bumps ok and high speed stuff but when going slow and going over sharp speedbumps or rail road tracks it almost feels like the shock is topping out which is weird. Some factory 3.0s may be in my future sooner than later.

Hoping to get the truck out this coming Friday for a little shake down off road. Anyway here is the pics which is what you came for!



[url=https://flic.kr/p/2k9Juup]

[url=https://flic.kr/p/2k9Ee9Z]

[url=https://flic.kr/p/2k9EmMp]

[url=https://flic.kr/p/2k9Jctp]

[url=https://flic.kr/p/2k9Juth]


[/url][/url][/url][/url][/url]

 

[DEGBTI]

so bad ass!

 

[sixshooter_45]

Finally got the rest of my parts in and was able to get everything installed. Super happy with the KHC front and rear bumps as well as the rear suspension setup. So far I am not very happy with the springs up front. Soaks up bigger bumps ok and high speed stuff but when going slow and going over sharp speedbumps or rail road tracks it almost feels like the shock is topping out which is weird. Some factory 3.0s may be in my future sooner than later.

Hoping to get the truck out this coming Friday for a little shake down off road. Anyway here is the pics which is what you came for!

I may have missed a post but did you have your front shocks recalibrated to zero them out after you installed the Geiser Springs?

 

[hdvvraptor]

wow those wheels im in love! awesome build so far

 

[TerribleONE]

I may have missed a post but did you have your front shocks recalibrated to zero them out after you installed the Geiser Springs?

not yet but from my reading I’m not sure it’s really gonna make that big of a difference see mixed reviews. I’m gonna try and do that ASAP and report back.

wow those wheels im in love! awesome build so far

Thanks man!

 

[sixshooter_45]

not yet but from my reading I’m not sure it’s really gonna make that big of a difference see mixed reviews. I’m gonna try and do that ASAP and report back.



Thanks man!

Most have reported a noticeable and favorable results from everything I've read.

 

[Ryan C]

Nice truck! I have factory 3.0 live valves and increased preload to create a 1.5" lift. I have SVC uca's and when I first took it out after the install, without properly setting the adjustment on the sensors or recalibrating ride height, I had a very noticeable clunk on full extension. Plus the truck was much stiffer than expected, which made the clunk worse. I first adjusted the SVC UCA mounting point for the sensor, and it made a big difference. From there, I further had the recalibration done by the dealer. Both these changes had a noticeable improvement. However, neither quite brought the truck back to stock, and this is in my view likely due to the fact there was now 1.5" less downtravel. With Geisers, this would be even more pronounced. I suggest you try the recalibration before buying the factory 3.0s. That said, if you're going for more adjustment and cooling, then the factory 3.0s are definitely an improvement. Hope this helps