Tahoe Terrain Raptor

[Juiced4ever]

Next on the docket fro the Truck were some lights. Got some 4.5" long throw light pods. Went the Chinese route and they work just fine, just in case any of you were on the fence about that. Also did Alternative Offroad mounts for them. Overall happy with all of it and the install wasn't bad at all.

 

[Juiced4ever]

About a week later my new bumper showed up care of Rogue Racing. I think I have posted some of the pictures on here before. So if you have seen them cool, if you haven't seen them here you are. For those of you that know me you know how much I like to cut on trucks. So this install was fun. Mr. Grinder meet Mr. Raptor!

 

[Juiced4ever]

Here is a pic of the cut line for Rogue if anyone has one of the Renegade bumpers coming there way. And here is the finished bumper install.

 

[Juiced4ever]

So this is how the Truck sits today. Lots of fun offroad miles under the belt at this point. Next on the list will be the Camburg 1.5 uniball uca's. Should have those next week sometime.

Then new rear leafs and 3.0's. So hopefully that will be coming down the pipeline sooner than later.

 

[Juiced4ever]

Finally got around to picking up my camburg uca's. And will get them installed when down at the R.O.C. Shop on Friday. Pics don't do these justice they are stout!

 

[Juiced4ever]

UCA's are installed. Certainly feel a bit of difference up front. Steering is more planted through bumps. Love the look and certainly eye catching when you walk by. Also pics don't do them justice, super beefy in person.

 

[vanilla_gorilla]

UCA's are installed. Certainly feel a bit of difference up front. Steering is more planted through bumps. Love the look and certainly eye catching when you walk by. Also pics don't do them justice, super beefy in person.

AAAHHHHHH, i want to go test them out tomorrow!!! STOP THE RAIN!

 

[Trick.Raptor]

The Camburg 1.5 require an aftermarket wheel/tire correct? I thought I saw somewhere there was a Camburg 1.25 as well for those with stock wheels.

 

[FP Forged]

I'm digging the bed rack Pete. Even with the spares mounted it looks like it leaves a lot of room in the bed. I'll have the Camburg LCA's off my buddies truck shortly if you ever wanted to work out some kind of trade. Build another bed rack in exchange for the LCA's?

 

[Juiced4ever]

@Trick_Raptor yeah 1.5" require aftermarket wheels. They make the 1.25 with bushings instead of heims for stock offset wheels