SVC Adjustable Bump System

[Huck]

Much easier to just unbolt the hangers for teh stock exhause and let it hang. Cutting the bolt takes forever.

 

[oplersx]

Much easier to just unbolt the hangers for teh stock exhause and let it hang. Cutting the bolt takes forever.

I am not a patient guy, so that might be a challenge how long it takes you? with a sawsall?

 

[Huck]

Saws all took 4 blades and about 25-30 min of mf'ing till it cut through.

Dropping the exhaust took about 5 min. It's 6 bolts


Sent from my iPhone using Tapatalk

 

[mkelly984]

I keep hearing the same thing about the sawsall, mine took all of about 10 seconds to cut through the bolt.

 

[Juncle]

Same here sawsall - maybe 20 seconds - metal blade

 

[oplersx]

Then must be the power of the saw and blade

 

[TXRPTOR37]

Sawsall took me about 2 minutes total with a 30 second break to let the blade cool. Get the correct blade and you'll be done quickly.


Sent from my iPhone using Tapatalk

 

[Labraptor]

Great product just installed mine this weekend. Just a heads up though the printed instructions(same as download from site) tell you street mode and off road mode are both mounted the same way. This differs from what is shown at the beginning of this thread.
Found where we went wrong. At the bottom of a page it says see picture below for setting bump if using aftermarket springs for everyday and off roading. We failed to register that we needed to move to the next page.

 

[Glassman]

the guys that cut the bolt faster than most must have that infomercial DUALSAW DUAL BLADE Reciprocating Saw they make it look the ultimate sawsall

lol

 

[TXRPTOR37]

the guys that cut the bolt faster than most must have that infomercial DUALSAW DUAL BLADE Reciprocating Saw they make it look the ultimate sawsall

lol

I used the saw on my Swiss army pocket knife.


Sent from my iPhone using Tapatalk