Shocks bad???

[Chzhead]

So I did some offroading a few week back in Colorado/Utah and I noticed when going over washboards in the road, the rattle up front was atrocious. I can't imagine this being normal. Are my shocks/valves going bad? Shocks are rebuilds with about 30k miles on them, only about about 150 hard offroad miles on them. I took some video (attached)

 

[GCATX]

Doesn't sound like shocks to me. Check your sway bar links, they're probably shot if you've already replaced the shocks.

 

[MurderedOutSVT]

Doesn't sound like shocks to me. Check your sway bar links, they're probably shot if you've already replaced the shocks.

Yeah, check sway bar and end links

 

[Chzhead]

Doesn't sound like shocks to me. Check your sway bar links, they're probably shot if you've already replaced the shocks.

Sounds better (and cheaper) than shocks. Any good aftermarket suggestions or OEM is good enough???

 

[MurderedOutSVT]

Check both sides out for play (loose/wore) first.

 

[GCATX]

Sounds better (and cheaper) than shocks. Any good aftermarket suggestions or OEM is good enough???

I got some moog's at orielly's that were in stock. Seem fine to me.

 

[Beastalo]

I'm not mechanical at all, could be a waste of time but try checking your skid plate bolts. I have a 2013, bought it used and skid plate bolts were missing or loose.

 

[Chzhead]

I'm not mechanical at all, could be a waste of time but try checking your skid plate bolts. I have a 2013, bought it used and skid plate bolts were missing or loose.

They were tight last time I was under it but can't hurt to check again.

 

[Chzhead]

OK, it took a few weeks to get the links done......been tied up. Got new End links on and things sound better although even roads here are not as bad as the washboards I was on so hard to tell if that truly got rid of it. Time (or my next vacation) will tell.

Skid plate bolts are tight as well.

 

[MTF]

Sway Bar Ends Links!!!