Reply to thread

Message: <blockquote data-quote="HARLEY6LF250SDU" data-source="post: 20810" data-attributes="member: 148">The purpose of pressure washing, is to remove salt and crud before under coating, not so much to remove surface rust. The drive shaft, break rotors, suspension parts when New, will show surface rust pretty bad. Walk onto most dealer lots, and look under the trucks. As you put miles on yuor truck, road grime, brake dust etc will help coat your bare metal parts. That surface rust will come right off with a little steel wool, scotch brite or emery cloth.randy</blockquote>