Rigid paint wearing off?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DubbsFaris

Full Access Member
Joined
Apr 11, 2011
Posts
886
Reaction score
378
Location
Alamo
Anyone have a good fix for the black paint wearing off the Rigid 40" housing?

It's the paint on the fins of the backside of the light. If they faced forward, I would assume bug hits were cracking the paint off, but that's not the case, and it can't be heat from the light. It's been on a total of maybe 2 hours cumulatively over last two years ive had them.
 

Biggest

FRF Supporting Member
Supporting Member
Joined
Jul 2, 2013
Posts
879
Reaction score
1,115
Rigid will replace the housing free of charge, you need to pay shipping both ways. You can send the light back to them with a note, include your phone number in a note to them, they will send you back the light with a new housing. Do not attempt to disassemble the housing as it will void your warrantee. The turn around time is about two weeks.

Gluck
 

Big Blue

Administrator
Staff member
Admin
Supporting Member
Joined
Aug 1, 2011
Posts
4,273
Reaction score
7,600
Location
USA
Rigid will replace the housing free of charge, you need to pay shipping both ways. You can send the light back to them with a note, include your phone number in a note to them, they will send you back the light with a new housing. Do not attempt to disassemble the housing as it will void your warrantee. The turn around time is about two weeks.

Gluck

If you purchased within the past 12 months, Rigid will cover the shipping both ways. If you purchased over a year ago, Rigid will cover the shipping back to you.

I just did this a few week ago for a offroading damaged Rigid and they send me a new replacement bar in less than 2 weeks, no questons asked.
 

RigidIndustries

Supporting Vendor
Supporting Vendor
Joined
Aug 15, 2012
Posts
88
Reaction score
56
Location
Mesa, Az
Anyone have a good fix for the black paint wearing off the Rigid 40" housing?

It's the paint on the fins of the backside of the light. If they faced forward, I would assume bug hits were cracking the paint off, but that's not the case, and it can't be heat from the light. It's been on a total of maybe 2 hours cumulatively over last two years ive had them.

Please call our warranty department as soon as you can and we will gladly take care of this issue you are having with your housing. We stand behind our product and back it with a lifetime warranty. Thank you very much for choosing Rigid Industries!
480-655-0100
[email protected]
 
Top