Rear Shackles any One.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

36vegas

Full Access Member
Joined
Dec 16, 2011
Posts
72
Reaction score
10
Has anyone installed the Poly Performance rear lowering shackles on a Raptor? There web site says 1 3/4" drop from stock. Any one.
 

RPG

Supporting Vendor
Supporting Vendor
Joined
Mar 12, 2011
Posts
2,029
Reaction score
2,379
Location
Orange County
Has anyone installed the Poly Performance rear lowering shackles on a Raptor? There web site says 1 3/4" drop from stock. Any one.

Have not, but the National Springs Standard duty set will drop the back down about 1" and the ride makes stock feel very sub par.
 

Avmech

Full Access Member
Joined
Mar 1, 2012
Posts
124
Reaction score
21
Was wondering the same thing, figure 150 bucks is better then 1400 bucks right now. I know you get what you pay for but this seems like a good solution for now. These are supposed to give you more travel as well as drop the truck. This just seems to be better then moving the perch on the front.
 
Last edited:

Aaron

Meme Corps Commandant
Joined
Jun 13, 2011
Posts
13,097
Reaction score
7,475
Location
WA
Was wondering the same thing, figure 150 bucks is better then 1400 bucks right now. I know you get what you pay for but this seems like a good solution for now. These are supposed to give you more travel as well as drop the truck. This just seems to be better then moving the perch on the front.

You're not going to gain any total travel from them. You're going to lose bump travel and gain droop travel. I thought about it, but the idea of losing any up-travel in my suspension pushed me away from it.
 

Aaron

Meme Corps Commandant
Joined
Jun 13, 2011
Posts
13,097
Reaction score
7,475
Location
WA
I should add, that for a street-going raptor, other than pinion angle, which I don't think would be affected as your lift blocks set that. You'd be good to go.

Someone may chime in who knows more than me though.

I do know that Conejoracer used a slightly smaller lift block to achieve the same thing.

here's that thread http://www.fordraptorforum.com/f9/lowering-rear-10618/
 

Rceccanti

Member
Joined
Oct 6, 2016
Posts
12
Reaction score
18
Location
Tacoma WA
Camburg rear shackles

Just recently installed my rear shackles on my 13' Raptor.
Front struts have a 2" lift that FORD installed.
im Running the BFGoody 37" KO2

Measuring from the ground to the fender,
Front 42 1/4"
Rear 41 3/4"
 

Attachments

  • IMG_6865.jpg
    IMG_6865.jpg
    82.3 KB · Views: 91
  • IMG_6866.jpg
    IMG_6866.jpg
    65.2 KB · Views: 104
  • IMG_7740.jpg
    IMG_7740.jpg
    44.5 KB · Views: 97
  • IMG_7742.jpg
    IMG_7742.jpg
    59 KB · Views: 86
  • IMG_7744.jpg
    IMG_7744.jpg
    58.2 KB · Views: 79
Top