Raptor Fun: in R/C Scale

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

KAH 24

Full Access Member
Joined
Aug 30, 2020
Posts
176
Reaction score
456
Location
McKinney, TX
If you enjoy your Raptor, but would prefer to break something at lower cost—I’d suggest considering a remote controlled scale model truck.

I purchased a Traxxas Unlimited Desert Racer (UDR)—roughly 1/7th scale. It has an independent front/solid rear axle setup with remote reservoir shocks in all corners, fancy LED lights (including brake lights), and tops out at 52 mph (measured using the optional GPS Bluetooth app).

Of note, it has a rudimentary yet effective stability/traction control setup which I can dial up/down—to address my lack of skill.

It’s a pricey toy (batteries/charger/upgradedspare parts), but inevitably when I break something—the damage to the wallet will be minimal (hopefully).

R/C has come a long way since I was a kid in terms of realism, engineering, technology, and accessories.
 

Attachments

  • 05892F3D-19E9-4CB0-8A3A-59F1F8389691.jpeg
    05892F3D-19E9-4CB0-8A3A-59F1F8389691.jpeg
    427.1 KB · Views: 146
  • 7869FE24-00DA-4917-A25C-0AFBB6726DE7.jpeg
    7869FE24-00DA-4917-A25C-0AFBB6726DE7.jpeg
    451.9 KB · Views: 139
  • 097DF080-C0A4-4AF7-A94B-29B69779D9AC.jpeg
    097DF080-C0A4-4AF7-A94B-29B69779D9AC.jpeg
    396.7 KB · Views: 136
  • 63C8E0ED-A75E-4D69-97AE-F4D1815E47DC.jpeg
    63C8E0ED-A75E-4D69-97AE-F4D1815E47DC.jpeg
    263.7 KB · Views: 143
Last edited:

EricM

FRF Addict
Joined
May 11, 2016
Posts
3,483
Reaction score
3,215
Location
OHIO
The bigger scale stuff is nice because it can clear the grass instead of dragging on the bottom constantly. I want to get a 1:5 scale next, something that can rip it through 4" tall super thick fescue grass.
 

Jakenbake

FRF Addict
Joined
Sep 20, 2017
Posts
1,792
Reaction score
2,454
Not trying to de-rail the thread, but have you all seen the 1/4 scale air planes? Something like a P47 with a rotary engine, those are seriously cool.

I think a roughly 1/4 scale trophy truck would be awesome. Especially with a little Moruzzi V8 in it, 1” shocks, and 10” tires lol.
 

MurderedOutSVT

Brodozin
Supporting Member
Joined
Apr 17, 2021
Posts
13,738
Reaction score
45,081
Location
The ATL
Not trying to de-rail the thread, but have you all seen the 1/4 scale air planes? Something like a P47 with a rotary engine, those are seriously cool.

I think a roughly 1/4 scale trophy truck would be awesome. Especially with a little Moruzzi V8 in it, 1” shocks, and 10” tires lol.
No i always thought wrecking a plane would be worse than rolling the truck 10X
 

Nex

RIP CoronaRaptor
Joined
Sep 2, 2021
Posts
8,363
Reaction score
23,970
Location
Washington State
Following thread for updates.

Looking ar a pair of these for my boys, 9 and 10. They keep braking the cheap ones from Amazon. The 10 year old takes it apart and trys to fit it while I am at work.

Looking at the Raptor body for one and some type of buggie for the other.

And you are correct. RC has come a long way since the Grasshopper.
 

EricM

FRF Addict
Joined
May 11, 2016
Posts
3,483
Reaction score
3,215
Location
OHIO
If you want a good basher, the 4WD Slash Trucks are the way to go. They take abuse like no other. The 2WD versions are too tail happy to be fun to drive.

I still run old Tamiya stuff around- the common parts are still available and cheap, even for the old stuff. I have a brushless motor and 11.1V LiPo on one of my TA02s and it'll do 70 MPH easy.

All the new motors and electronics fit the old cars. The only challenge is finding a LiPo battery shape/size that fits where the old flat pack went, or modifying the car to work with a different shaped battery. I modify the cars to take the new batteries, as they haven't yet figured out that a LiPo pack in the exact size and shape of the old NiCd packs would sell like hotcakes.
 
Top