Need some help diagnosing

[Nex]

it makes them a little more slippery.

 

[The Car Stereo Company]

No codes ...but found the culprit. These hoses are so buried. And these ******** bumpers don't help any. View attachment 442265View attachment 442266

i didnt know you can put ceiling tiles on your garage floor. gonna have to try it

 

[Zeusmotorworks]

Make sure you have NOT stripped the clamp. NO ONE knows how or bothers to use a torque wrench anymore. They just over tighten the $HlT out of everything and wonder why it goes to $HlT. Clean the hoses... don't go crazy and use something silly like brake cleaner. Then spray some cheap hairspray on the connection (or use finger <jokes here>). Reinstall with proper torque and live free of charge pipes blowing off.

 

[SCAR911]

Make sure you have NOT stripped the clamp. NO ONE knows how or bothers to use a torque wrench anymore. They just over tighten the $HlT out of everything and wonder why it goes to $HlT. Clean the hoses... don't go crazy and use something silly like brake cleaner. Then spray some cheap hairspray on the connection (or use finger <jokes here>). Reinstall with proper torque and live free of charge pipes blowing off.

View attachment 442298

Isn't the proper tq tighten them right before they break?

 

[GCATX]

So, just 1 ugga dugga on the milwaukee 18v?

 

[smurfslayer]

It's a stage 2 goose tune. Are you saying 22 is no big deal?

I’m sayin’ 22 is spinning the stocker’s pretty hard. I am not able to comment on longevity, durability, design spec, etc. but, i was given to understand that much over 18psi, the stockers will produce a cr@p ton of heat with minimal increase in power because they’re past their peak efficiency. I’m sure there are folks on here spinning them harder and some not as much it just seems a bit on the high side.

I’m glad this was an easy to troubleshoot issue.

 

[SCAR911]

I’m sayin’ 22 is spinning the stocker’s pretty hard. I am not able to comment on longevity, durability, design spec, etc. but, i was given to understand that much over 18psi, the stockers will produce a cr@p ton of heat with minimal increase in power because they’re past their peak efficiency. I’m sure there are folks on here spinning them harder and some not as much it just seems a bit on the high side.

I’m glad this was an easy to troubleshoot issue.

Just sent some new logs off to goosetuned. We will see what's going on

 

[MurderedOutSVT]

Make sure you have NOT stripped the clamp. NO ONE knows how or bothers to use a torque wrench anymore. They just over tighten the $HlT out of everything and wonder why it goes to $HlT. Clean the hoses... don't go crazy and use something silly like brake cleaner. Then spray some cheap hairspray on the connection (or use finger <jokes here>). Reinstall with proper torque and live free of charge pipes blowing off.

View attachment 442298

Dude that brought back memories. Aqua net was the fuel for the potato cannon back in the day. It had the most alcohol content

 

[The Car Stereo Company]

So, just 1 ugga dugga on the milwaukee 18v?

my 1/4 drive is tiki tiki
my 3/8 drive is taki taki
my 1/2 drive is toki toki

 

[MurderedOutSVT]

my 1/4 drive is tiki tiki
my 3/8 drive is taki taki
my 1/2 drive is toki toki