Need Help- Rear door panel cup holder repair

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

cfabrizio

Full Access Member
Joined
Dec 21, 2011
Posts
31
Reaction score
7
Location
Kent Island, MD
So, I had some sort of sticky residue on the passenger's rear door panel cup holder- at the end of the arm rest. I screwed up and used some industrial goo-gone which ended up ruining the finish and leaving white spots. I tried to find a replacement piece through the Ford dealer but they told me I had to order a new door panel at the tune of $700. Any chance anyone know if I can order just the trim piece or if there is a paint that I can use to blend this in without replacing the entire panel. Thanks for any help you all have.....C

IMG_2398.jpeg
 

The Car Stereo Company

aka grumpy car stereo guy and frf rolodex
Supporting Member
Joined
Jul 8, 2012
Posts
32,671
Reaction score
23,760
Location
here, on frf
need to know exactly what you used. some types will leave it white, but with a wet towel will turn back to the original color. you can try the spray wax/ interior cleaner and see if it comes back
 

New recaros

FRF Addict
Joined
May 23, 2019
Posts
2,934
Reaction score
4,654
Location
Colorado
Are you sure that you didn’t just turn the residue white. I have found when that happens, WD-40 sprayed on a rag and wiped on the surface works. Let it sit a minute or two. Try a very small area.
 
Top