This is the story of my "Dun it meself" bed rack. I bought a bunch steel used to make a scaffold at a garage sale. It was 1 1/4" square tubing that had U shaped ends with pins. So, I cut it up and used it to make the rack. The rest of the metal was bought at Menards Had to be done, my wheel wells where both dented in from strapping the tire in. I made it so I can just pop a couple pins to remove any or all of the things it is used to carry. I made a carrier to hold a Rubbermaid container, Gas can, and the spare tire. Another carrier for my jack. Then I made a carrier to hold my grease gun and supplies for work. The last carrier holds two more Rubbermaids, that will be used on trips. I'll start with a couple pictures of it done, then add some progress shots.
