Looking for help with axle and IWE

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

LVRaptor69

Member
Joined
May 1, 2023
Posts
11
Reaction score
0
Location
Las Vegas
I have an 18 with what I think has the failing IWE sound. The grinding when going slow and when braking. Goes away 80% in 4A. I bought a new check valve, but if that doesn’t fix it, can I buy a delete kit and be done with it, or do I need to repair something else first?
While looking at it I also have this leaky inner axle.

Do I need just need to change the seal? What’s the name of it?

I work on older VW stuff so I’m not super well versed on these trucks. Thanks for your help.
IMG_2190.jpeg
 

FordTechOne

FRF Supporting Member
Supporting Member
Joined
Jul 29, 2019
Posts
6,664
Reaction score
13,040
Location
Detroit
You’re better off just properly fixing the IWE system. The vacuum system needs to be diagnosed before installing any new parts, otherwise you’ll have repeat failures. All you need is a vacuum pump for diagnosis.

As far as the seal, you’ll need a slide hammer to remove the axle shaft from the differential and a seal installer to seat the new seal on the axle housing.
 
OP
OP
L

LVRaptor69

Member
Joined
May 1, 2023
Posts
11
Reaction score
0
Location
Las Vegas
You’re better off just properly fixing the IWE system. The vacuum system needs to be diagnosed before installing any new parts, otherwise you’ll have repeat failures. All you need is a vacuum pump for diagnosis.

As far as the seal, you’ll need a slide hammer to remove the axle shaft from the differential and a seal installer to seat the new seal on the axle housing.
Thanks. I ordered a check valve because the other one was a little sticky. I’ll prob take this into Ford because it still has the drivetrain warranty (is this counts?). Was trying to avoid their 6 week wait times.
 
OP
OP
L

LVRaptor69

Member
Joined
May 1, 2023
Posts
11
Reaction score
0
Location
Las Vegas
You’re better off just properly fixing the IWE system. The vacuum system needs to be diagnosed before installing any new parts, otherwise you’ll have repeat failures. All you need is a vacuum pump for diagnosis.

As far as the seal, you’ll need a slide hammer to remove the axle shaft from the differential and a seal installer to seat the new seal on the axle housing.
Do you know if the IWE system and axle are covered under the 6 year /100k warranty? It’s drivetrain but two SA’s at different dealerships couldn’t tell me if it was part of the drivetrain. Thanks.
 
Top