Reply to thread

Message: <blockquote data-quote="infinitereality" data-source="post: 347910" data-attributes="member: 9436">Sorry no write up.  The skinny on it is:- Used dremel to get lense off housing (it's sealed), 31mm festoon LED replacement bulb popped right in.  5min epoxy to seal it all back.- Remove mirror (youtube video of how to easily do it)- Remove mirror outside housing (4 torx that's behind mirror)- Remove door panel (youtube again)- Remove mirror (3 bolts behind panel)- tap the purple wire on the door side of the plug going towards mirror and run into mirror- Tap the ground wire for your stock mirror signals- Pop the factory cap on bottom of mirror off and run your wires to it, crimp on some female connectors- Put door panel, mirror housing and mirror back together- Plug it into puddle lights, if doesn't work flip wires around- Pop puddle light into mirror bottom- Done! <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" /></blockquote>