Leaking shock?

[Bryantbjb]

Hi. Shock leaking? I’m guessing it is, but just wanted to check with others. Passenger side. Drivers side looks good. Leaking?drivers side

 

[Bryantbjb]

Anyone?

 

[Bowewelding]

Very little.. a little sweat like that is not that bad..I would not worry about it until it is more noticeable ..I rebuild them if your on the so cal area..finding the rebuild kit is kind of tricky..I found some at shock seals .com but the were not correct for the shock bodies..the ones for the seal head fit but not the shock bodies..I recently put the oem kings on mine so that I can further tune them than the stock foxs would allow

 

[Bowewelding]

I'll have my stock ones for sale..u can buy a stock set and have them on the shelf ready to swap..then rebuild the ones u have and be ready for the next swap

 

[Bryantbjb]

Thanks. Still under warranty so figure the dealer can handle. Sure appreciate the guidance.

 

[Bowewelding]

Not a prob.!

 

[SS308]

I'll have my stock ones for sale..u can buy a stock set and have them on the shelf ready to swap..then rebuild the ones u have and be ready for the next swap

Are these on a Gen 1? If so, I would be interested. What do have to have for them?

 

[Bowewelding]

No I had my stock shocks off of my gen 2 for sale..they have eibach coils on them and I put the Schrader valves in them so they can be conventionally filled with nitrogen.. 1000 for all 4 obo.. some people are putting the gen 2 shocks on there gen 1

 

[SS308]

I'm interested. Do you have pics?
Also I believe the front shocks will fit if I use my stock coils.

 

[Bowewelding]

Stock coils and eibach coils. U may be able to sell the eibach coils to a gen 2 guy..I have seen an adapter mount for the gen 1 to run the complete gen 2 shock and coil tho